Table of Contents
Advertisement
Before using the oven for the first time
In this section, you can find out what you must do before using
your oven to prepare food for the first time. First read the
section on Safety information.
Setting the time
Once the oven has been connected, the
light up on the display panel. Set the clock to the right time.
Press the
sensor.
0
1.
The display panel displays the time
Set the time with the
or
@
2.
Confirm the time with the
3.
The programmed time is displayed after a few seconds.
Programming the oven
There are different ways to programme the oven. Programming
the type of heating, temperature or grill power. The oven can be
programmed with the cooking time (duration) and the end time
for each dish. For more information, see the chapter Setting the
time functions.
Setting the type of heating and temperature
Example in diagram: Top/bottom heating
Use the function selector to set the type of heating.
1.
Using
or
, set the required temperature or grill setting.
@
A
2.
The oven will start to heat up.
Switching the oven off
Set the function control knob to the zero setting.
Changing the settings
The type of heating and the temperature or grill power may be
changed at any time.
and
:
0
‹
‹‹
‚ƒ
.
‹‹
sensors.
A
sensor.
0
at 190 °C.
%
Heating the oven
To remove the "new" smell, heat the oven empty with the door
closed. The most effective option is to heat the oven for one
hour with the top and bottom heating elements
240 ºC. Check that no packaging has been left inside the oven.
symbols
Select top and bottom heating
1.
knob.
Press the
@
2.
panel.
Turn the oven off after one hour. To do this, turn the function
control knob to zero.
Cleaning the accessories
Before using the accessories for the first time, clean them
thoroughly using a cloth, hot water and a little soap.
Rapid heating
With the rapid heating setting, the oven reaches the
programmed temperature very quickly.
Rapid heating must be used for temperatures of more than
100 ºC.
To ensure uniform cooking, the food must not be put into the
oven until rapid heating has been completed.
Select rapid heating
1.
Select the required temperature using the
2.
The
s
symbol lights up on the display panel. The oven will begin
to heat up.
End of rapid heating
A signal will sound, the
the oven and select the required function and temperature.
Cancelling rapid heating
Set the function control knob to the zero setting. The oven
switches off.
Note: With the rapid heating function you cannot programme
the cooking time duration.
using the function control
%
sensor until 240 ºC is displayed on the display
using the function control knob.
I
s
symbol will go out. Place the food in
%
set at
and
sensors.
@
A
7
Advertisement
Table of Contents
