Mounting Hardware - ABB Symphony Harmony Series Instruction

Instruction Content
Introduction
Installation
Maintenance
Repair and
Replacement
How to Use this Instruction
WBPEEUI260047A0
TE R M IN ATIO N
U N IT
Figure 1-2. Mounting Hardware
This instruction contains the following sections:
Provides an overview of the NTHS03 termination unit.
Explains the physical installation, wiring and cable
requirements, dipshunt settings and handling of the termina-
tion unit.
Contains a maintenance schedule.
Explains how to replace the fuses and termination unit.
Read this instruction in sequence. It is important to become
familiar with the entire contents of this instruction before
using the module. Refer to a specific section for information as
needed.
1. Perform the steps in the installation section.
2. Refer to the maintenance section for scheduled mainte-
nance requirements.
3. Refer to the repair and replacement procedures to replace
a termination unit.
Instruction Content
FIE LD
TE R M IN ATIO N
PA N E L
T038 87A
1 - 3