A-frame ladder. adjusts to fit pools 48 inch to 54 inch. ladder must be attached to pool frame - do not use with inflatable pools. swing up section of ladder must be installed on outside of pool weight limit 300 lbs. (6 pages)
Page 1
SAVE THESE INSTRUCTIONS DEALER/INSTALLER: GIVE TO HOMEOWNER MODEL 6000X ADJUSTABLE HEAVY DUTY INPOOL LADDER 42” TO 56” ASSEMBLY AND INSTALLATION MANUAL Assembly video available online: www.conferplastics.com WEIGHT LIMIT 300 LBS. The Anti-Entrapment Barrier is included in this ladder for the U.S. and Canada only, as required by ANSI/APSP requirements.
Page 2
Model #6000X Adjustable Heavy-Duty Inpool Ladder ASSEMBLY INSTRUCTIONS - PLEASE READ BEFORE ATTEMPTING ASSEMBLY Parts List Tools Needed for Assembly HANDRAIL 2 - Handrails * - Cordless Drill Motor 2 - Stringers (Legs) * - 1/8" Drill Bit PLATFORM 4 - Upper treads...
Page 3
Step 10. Step 11. Separate sections at Fingers Large the top slightly and Small Barrier Barrier position Upper Brace over Small Barrier Section. Next, spread the “fingers” on the Upper Brace into position on the Large Barrier Snap Small and Large Barrier Sections into slots Section as shown.
Page 4
Order online at www.conferladders.com CONFER PLASTICS, INC. FIVE YEAR WARRANTY Confer Plastics, Inc. warrants their swimming pool ladders and steps to be free from defects in workmanship for five years from date of purchase. DO NOT RETURN DEFECTIVE PART TO DEALER E-MAIL CONFER PLASTICS AT: LADDERS@CONFERPLASTICS.COM...
Need help?
Do you have a question about the 6000X and is the answer not in the manual?
Questions and answers