Confer Plastics ROLLGUARD 7200 Assembly And Installation Manual
A-frame ladder
Hide thumbs
Also See for ROLLGUARD 7200:
- Assembly, installation and use manual (8 pages) ,
- Assembly and installation manual (9 pages) ,
- Assembly, installation and use manual (16 pages)
Advertisement
Quick Links
SAVE THESE INSTRUCTIONS
DEALER/INSTALLER: GIVE TO HOMEOWNER
MODEL #7200
"ROLLGUARD
" A-FRAME LADDER
®
LADDER MUST BE ATTACHED TO POOL FRAME.
DO NOT USE WITH INFLATABLE POOLS
ASSEMBLY AND INSTALLATION MANUAL
Proudly Made in U.S.A. by
US Patent Numbers
8,191,682
8,191,681
8,202,018
Advertisement
Related Manuals for Confer Plastics ROLLGUARD 7200
Summary of Contents for Confer Plastics ROLLGUARD 7200
- Page 1 SAVE THESE INSTRUCTIONS DEALER/INSTALLER: GIVE TO HOMEOWNER MODEL #7200 “ROLLGUARD ” A-FRAME LADDER ® LADDER MUST BE ATTACHED TO POOL FRAME. DO NOT USE WITH INFLATABLE POOLS ASSEMBLY AND INSTALLATION MANUAL Proudly Made in U.S.A. by US Patent Numbers 8,191,682 8,191,681 8,202,018...
- Page 2 Model #7200 “ROLLGUARD ® ” A-FRAME LADDER Ladder must be attached to pool frame - do not use with inflatable pools ASSEMBLY INSTRUCTIONS - PLEASE READ BEFORE ATTEMPTING ASSEMBLY Handrails Deck ROLLGUARD ® Right Bridge Left Bridge (behind the ROLLGUARD ®...
- Page 3 STEP 1: Tools needed: rubber mallet Parts needed: 1- Inside left rail (marked “IL” at the top) 1- Inside right rail (marked “IR” at the top) INSIDE LADDER 4- Ladder treads #2: Correct, tap down #1: Lay “IL” rail on flat surface. Incorrect, do not until seated, note track is block track.
- Page 4 STEP 2: Tools needed: rubber mallet Parts needed: 1- Outside left rail (marked “OL” at the top) 1- Outside right rail (marked “OR” at the top) OUTSIDE LADDER 5- Ladder treads #2: Correct, tap down #1: Lay “OL” rail on flat surface. Incorrect, do not until seated, note track is block track.
- Page 5 Tools needed: rubber mallet, cordless drill w/Phillips driver STEP 3: Parts needed: 1- Deck 4- Handrails 1- Left bridge with lock assembly HANDRAILS/DECK 1- Right bridge 2- #10 x 1-1/4” self tapping screws 2- 1/4 - 20 x 1” Bolts 2- 1/4 - 20 Hex Nuts #1-3: Push handrails up through bottom of deck leaving about 3”...
- Page 6 STEP 4: Tools needed: rubber mallet Parts needed: 1- ROLLGUARD ® 1- Ladder tread INSTALLING ROLLGUARD ® #1: With the ladder laying on #2-6: Slide ROLLGUARD ® around to other side of ladder. it’s side, slide the ROLLGUARD ® into track, grab handle first. #7-8: Install bottom tread.
- Page 7 STEP 5: Tools needed: garden hose, cordless drill w/Phillips driver 1/4” drill bit, Phillips screwdriver, pliers Parts needed: 4- cap plugs PLACING LADDER IN POOL 2- Stabilizer Rails 2- 1/4-20 x 3-1/2” bolts, washers and hex nuts 1- Padlock CHOOSE A LOCATION THAT IS LEVEL AND IN FULL VIEW. POOL MUST HAVE COMPETENT ADULT SUPERVISION AT ALL TIMES WHEN IN USE.
-
Page 8: Safety Rules
A small amount of water left in ladder will not cause any damage. Replace the plugs so they won’t get lost. CONFER PLASTICS, INC. FIVE YEAR WARRANTY Confer Plastics, Inc. warrants their swimming pool ladders and steps to be free from defects in workmanship for five years from date of purchase.
Need help?
Do you have a question about the ROLLGUARD 7200 and is the answer not in the manual?
Questions and answers