Advertisement
Quick Links
Dealer/Installer: Give manual to homeowner.
Installer: Read "Safe Installation" on page # 2 and all instructions before beginning. For proper assembly and
installation, instructions must be followed completely.
Homeowner: Read "Safe Use" on back cover before using. Save these instructions.
Installation must comply with local codes and may require permits.
ADJUSTABLE HEAVY DUTY INPOOL LADDER
Adjusts to fit pool deck heights of 42" to 56" - Ladder must be attached to deck
ASSEMBLY, INSTALLATION AND USE MANUAL
Assembly video available online: www.conferplastics.com
To reduce the risk of drowning, entrapment, falls, paralysis, electrocution, or
other serious injury or death:
MODEL #6000X
WEIGHT LIMIT 300 LBS.
The Anti-Entrapment Barrier is included in
this ladder for the U.S. and Canada only,
as required by ANSI/APSP requirements.
If you would like to purchase the barrier,
Proudly Made in U.S.A. by
The Anti-Entrapment Barrier is NOT
intended as a substitute for competent
adult supervision.
please visit our website at:
www.conferladders.com
Advertisement
Related Manuals for Confer Plastics 6000X
Summary of Contents for Confer Plastics 6000X
- Page 1 Homeowner: Read "Safe Use" on back cover before using. Save these instructions. Installation must comply with local codes and may require permits. MODEL #6000X ADJUSTABLE HEAVY DUTY INPOOL LADDER Adjusts to fit pool deck heights of 42” to 56” - Ladder must be attached to deck WEIGHT LIMIT 300 LBS.
-
Page 2: Safe Installation
1 - Lower Base TREAD ADDITIONAL ACCESSORIES MAY BE PURCHASED # 6000X Extension Kit (Part # 6000X-EXT) - Raises ladder to reach deck heights from 57” to approximately 68”. Kit includes two extension boots, one additional ladder tread, hardware and instructions. - Page 3 Step 1. Step 2. Snap stringers Two sets of Lug into bottom tread. locations are provided. Tread Lugs If necessary lift Attach 4 upper treads the two stringers Use upper to the stringers in the lugs for off the ground, position determined by 50”...
- Page 4 Step 7. Step 8. Fill both stringers with water to allow the ladder to be submerged in the pool. Push the adjust- able tubes with mounting Stringers blocks into handrails. Step 9. Step 10. Large Small Barrier Barrier Attach the handrails to the ladder assembly, making certain that the Snap Small and Large Barrier Sections into...
- Page 5 Step 14. Slide Step 13. adjustable Place the ladder in tubes to Submerge in position the desired position water and tilt to a against deck. on the deck and slide 15° angle to allow the ladder assembly water to fill the down until the bot- treads.
- Page 6 To reinstall, see Step #13. CONFER PLASTICS INC. FIVE YEAR WARRANTY Confer Plastics Inc. warrants their swimming pool ladders and steps to be free from defects in workmanship for five years from date of purchase. DO NOT RETURN DEFECTIVE PART TO DEALER E-MAIL CONFER PLASTICS AT: LADDERS@CONFERPLASTICS.COM...
Need help?
Do you have a question about the 6000X and is the answer not in the manual?
Questions and answers