Basic Adjustments; Adjustment, Operation And Inspection, And Functional Setting Items In Service Mode - Canon 2/3 Hole Puncher Unit-A1 Service Manual

Basic Adjustments

Adjustment, Operation and Inspection, and Functional Setting Items
in Service Mode
In service mode, the finisher can perform the following adjustment, operation and inspection, and functional setting items.
■ Adjustment items
Items
(SORTER > ADJUST)
Adjusting the punch PNCH-Y
hole position in the hor-
izontal registration di-
rection
Adjusting the punch PNCH-X
hole position in feed di-
rection
■ Operation and inspection items
Items (SORTER > FUNC-
Adjusting the punch FN-SENS1
horizontal registration
sensor
Adjustment the punch FN-SENS2
waste full sensor
Reading the backup PUN-BK-R
data from the puncher
controller PCB
Writing the backup data PUN-BK-W
from the puncher con-
troller PCB
■ Functional setting items
Service Mode
Items
(SORTER > OPTION)
Switching the high- PUCH-SW
productivity punch
mode or high-accura-
cy punch mode of the
puncher unit
Setting whether to PUN-Y-SW
perform the horizon-
tal registration opera-
tion of the puncher
unit for matching with
the center of the pa-
per
Setting the punch PNCH-SW2
hole specification of
the puncher unit
Service Mode
When the punch hole is misaligned in the hor-
izontal registration direction.
When the punch hole is displaced in feed di-
rection.
Service Mode
TION)
When replacing the horizontal registration
sensor of the puncher unit.
- When installing/replacing the puncher Unit.
- When replacing the punch waste full sensor.
When replacing the puncher controller PCB.
When replacing the puncher controller PCB.
When switching the high-productivity punch
mode or high-accuracy punch mode.
When the adjustable range of the punch hole
horizontal registration adjustment (PNCH-Y)
is enlarged.
When replacing the puncher unit.
Use case
Use case
Use case
44
5. Adjustment
Remarks
When the setting of "PUN-Y-SW" is
0, the adjustable range is from -3 to
15.
When setting the punch mode to the
precision priority, this adjustment
cannot be executed.
Remarks
-
-
-
-
Remarks
The settings of this mode and the "Set-
tings/Registration" change at the same
time.
-
-