Advertisement
Figure 6
1. Support tube
2. Carrier frame
2. Secure the carrier frame to the cutting-unit side-plates
with 2 flanged locknuts (3/8 inch)
1. Basket-mounting pin
2. Basket guide
3. Flange-head bolt
4. Flanged locknut (3/8 inch)
(Figure
6).
6
Mounting the Basket Assembly
to the Cutting Unit
Parts needed for this procedure:
1
Basket assembly
Procedure
Mount a basket to each cutting-unit carrier-frame by inserting
the basket-mounting pin into the basket-guide bracket and
depressing the opposite mounting pin into the pivoting-basket
bracket
(Figure
7).
Important: Ensure that the front of the basket does not
contact the reel. If there is contact, refer to
the Basket Position (page
Figure 7
3. Pivoting-basket bracket
5
7 Adjusting
6).
Advertisement
