Table of Contents
Advertisement
Getting started
Installing the Gear VR software
To use the Gear VR, you must manually install the Gear VR software. When you connect the Samsung
GALAXY Note 4 to the Gear VR for the first time, the software installation will start automatically.
•
Before installing the software, ensure that the Samsung GALAXY Note 4 is connected to a
Wi-Fi or mobile network.
•
The installation method or screens may differ depending on the software version.
1
Connect the Samsung GALAXY Note 4 to the Gear VR.
2
When a voice prompt requests you to separate the Samsung GALAXY Note 4 from the Gear VR,
remove the Samsung GALAXY Note 4. Then, perform steps 3–10 on the Samsung GALAXY Note 4.
3
Tap Next.
4
Read the terms and conditions in the End User Licence Agreement (EULA) and if you agree with
them, tap Next.
5
Read the health and safety warnings and tap Confirm.
6
Tap Install.
The Samsung GALAXY Note 4 will begin installing the software.
28
Advertisement
Table of Contents
