Installing Gear Vr For S6 Software - Samsung Gear VR User Manual

Installing Gear VR for S6 Software

You must install the Gear VR for S6 software in order to use the Gear VR for S6. When you connect the
GALAXY S6 to the Gear VR for S6 for the first time, the set up process automatically begins.
Note: The setup process requires an active network or Wi-Fi connection. The Gear VR for S6 software files
occupy some storage space on your GALAXY S6 device.
1. Unlock your GALAXY S6 and turn up the volume so you can hear the voice prompts.
2. Carefully install the compatible mobile device into the Gear VR for S6 compartment. For more
information refer to
Important: If the GALAXY S6 is not connected properly to the Gear VR for S6, you are not prompted to
continue with the set-up process.
3. At the voice prompt, separate the GALAXY S6 from the Gear VR for S6 and remove the GALAXY S6.
4. On the Welcome screen, tap Next to begin the installation process.
5. When prompted to allow Google to check your GALAXY S6, tap Accept.
6. Read and agree to the terms and conditions in the End User License Agreement (EULA), then tap Next.
7. Read the health and safety warnings and tap Confirm.
8. From the Gear VR setup wizard screen, tap Install to install the software.
The Gear VR for S6 software begins downloading onto your device.
9. Select a language and tap Continue → Continue. You can change the language later.
24
Install the Mobile Device.