Advertisement
Main
Sub
code
code
50
08
FAX lead edge adjustment (scan)
Used to adjust and set the FAX document scan lead edge position and scan and print the document.
Sim50-8
SCAN EDGE
1:OC
2:SPF
3:RSPF
( 1 - 3 )
After input
1 - 3
[OK] key
Sim50-8
SCAN EDGE
OC
1:LEAD EDGE
2:LEFT EDGE
( 1 - 4 )
After input
1 - 4
[OK] key
Sim50-8
SCAN EDGE
LEAD EDGE/OC
( 43- 57 )
10
Paper off-center adjustment
Used to adjust the output area (main scanning direction) of scanned image data on paper.
When this simulation is executed, the selection window of the adjustment items and the current set value
are displayed.
(Adjustment item selection window)
Sim50-10 PRT. CENTER
1:TRAY1
2:TRAY2
3:TRAY3
1/2
[
Display text
1:TRAY1
2:TRAY2 (*)
3:TRAY3 (*)
4:TRAY4 (*)
5:BYPASS
6:DUPLEX (*)
Note 1: Items marked with (*) are displayed when TRAY2 and following options are not installed.
Note 2: When executing an adjustment copy from the manual paper feed (BYPASS) tray, set the following
paper according to the destination specification.
AB series
Inch series
The adjustment value is in the range of 1 - 99.
When the adjustment value is increased, the output image is shifted to the right. When the adjustment value
is increased by 1, the image is shifted to the right by about 0.1mm.
Select an adjustment item (mode) with the arrow keys, and enter the set value with numeric keys.
X
XX: Adjustment value of current state
YY: Inputted adjustment value
Sim50-8
SCAN EDGE
OC
XX
3:REAR EDGE XX
XX
4:RIGHT EDGS XX
X
( 1 - 4 )
Sim50-8
SCAN EDGE
XX
LEAD EDGE/OC
After input
43 - 57
YY
[OK] key
50
50
50
1- 99]
50
:Adjustment mode
:Print center offset (TRAY1)
:Print center offset (TRAY2)
:Print center offset (TRAY3)
:Print center offset (TRAY4)
:Print center offset (BYPASS)
:Print center offset (DUPLEX 2nd print surface)
A3 paper
Double Letter paper
MX-M182 SIMULATIONS 7-45
Contents
Sim50-8
SCAN EDGE
LEAD EDGE/OC
XX
X
PRINT
EXEC
Sim50-8
SCAN EDGE
LEAD EDGE/OC
XX
XX
SCAN
EXEC
EXEC
Sim50-10 PRT. CENTER
4:TRAY4
50
5:BYPASS
50
6:DUPLEX
50
2/2
[
1- 99]
50
Remark
Default:
TRAY1: 50
TRAY2: 50
TRAY3: 50
TRAY4: 50
BYPASS: 50
DUPLEX: 50
Advertisement
