Advertisement
Main
Sub
code
code
09
01
Duplex motor forward rotation check
Used to check the duplex motor rotation.
The duplex motor is rotated in the normal direction (paper exit direction) for 30sec.
After completion of the process, the machine shifts to the sub code input window.
(Execution start window)
Sim9-1
PRESS OK KEY EXEC
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Interrupts the output operation, and shifts to the sub code input window.
02
Duplex motor reverse rotation check
Used to check the duplex motor reverse rotation.
The duplex motor is rotated in the reverse direction for 30sec.
After completion of the process, the machine shifts to the sub code input window.
(Execution start window)
Sim9-2
PRESS OK KEY EXEC
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Interrupts the output operation, and shifts to the sub code input window.
04
Duplex motor RPM adjustment
Used to adjust the duplex motor rotation speed.
When this simulation is executed, the following setting window is displayed. Enter an input value with
numeric keys and press [OK] key or [START] key.
The setting range is in 1-13 steps.
(Setting window)
Sim9-4 MOTOR SPEED
1:MOTOR SPEED
[
When a value outside the setting range is inputted, it is ignored.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shift to the sub code input window.
05
Duplex motor switchback time adjustment
Used to adjust the duplex motor switchback time when the motor reverse rotation is controlled.
When this simulation is executed, the following setting window is displayed. Enter an input value with
numeric keys and press [OK] key or [START] key.
The setting range is 50-76.
When the adjustment value is increased by 1, the distance up to reverse start is increased by 3 steps in 1-2
phase excitement.
Sim9-5 SW BACK TIME
1:SW BACK TIME
[ 50-76]
When a value outside the setting range is inputted, it is ignored.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shift to the sub code input window.
DMF CHECK
[OK] key or [START] Key
DMR CHECK
[OK] key or [START] Key
• 18cpm/20cpm machine:
Set value : Speed (PPS)
01
: 637.2PPS (Slow)
4
02
: 640.4PPS
03
: 643.6PPS
04
: 646.9PPS
1-13]
4
05
: 650.1PPS
06
: 653.3PPS
07
: 656.5PPS
08
: 659.8PPS
09
: 662.9PPS
10
: 666.2PPS
11
: 669.4PPS
12
: 672.6PPS
50
50
MX-M182 SIMULATIONS 7-11
Contents
(Execution window)
Sim9-1
DMF CHECK
EXEC
(Execution window)
Sim9-2
DMR CHECK
EXEC
• 23cpm machine:
Set value : Speed (PPS)
01
: 760.2PPS (Slow)
02
: 764.1PPS
03
: 768.0PPS
04
: 771.8PPS
05
: 775.7PPS
06
: 779.5PPS
07
: 783.3PPS
08
: 787.2PPS
09
: 791.0PPS
10
: 794.8PPS
11
: 798.6PPS
12
: 802.5PPS
Remark
(Execution is not
allowed when
DUPLEX setting is
OFF.)
(Execution is not
allowed when
DUPLEX setting is
OFF.)
Default:
4
Default:
50
Advertisement
