Advertisement
Main
Sub
code
code
08
02
Main charger output (Grid = HIGH)
Used to check the main charger output.
When this simulation is executed, the following execution start window is displayed.
When [OK] key or [START] key is pressed, the main charger is turned on for 30 sec in the grid voltage HIGH
mode.
After completion of the process, the machine returns to the sub code input window.
(Execution start window)
Sim8-2
PRESS OK KEY EXEC
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Interrupts output operation and shifts to the sub code input window.
03
Main charger output (Grid = LOW)
Used to check the main charger output.
When this simulation is executed, the following execution start window is displayed.
When [OK] key or [START] key is pressed, the main charger is turned on for 30 sec in the grid voltage LOW
mode.
After completion of the process, the machine returns to the sub code input window.
(Execution start window)
Sim8-3
PRESS OK KEY EXEC
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Interrupts output operation and shifts to the sub code input window.
06
Transfer charger output
When this simulation is executed, the machine shifts to the following mode select window, and the list of the
modes to be outputted is displayed.
Select an output mode with numeric keys and press [OK] key or [START] key, and the transfer charger
output is made for about 30sec in the specified mode.
(Mode selection window)
Sim8-6 TC OUTPUT
1:NML_A
2:NML_B
3:SML_A
Window display
1:NML_A
2:NML_B
3:SML_A
4:SML_B
*
The items of (back) is not displayed when DUPLEX setting is OFF.
*
Small size paper is Letter R (A4R) width or below. When an output is completed, the machine shifts to
the mode select window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Interrupts the output operation, and shifts to the sub code input window.
MHV(H)
[OK] key or [START] Key
MHV(L)
[OK] key or [START] Key
[OK] key or [START] Key
4:SML_B
5:BYPASS
EXEC
2
Output mode
Normal size width (front)
Normal size width (back)
Small size width (front)
Small size width (back)
MX-M182 SIMULATIONS 7-10
Contents
(Execution window)
Sim8-2
MHV(H)
EXEC
(Execution window)
Sim8-3
MHV(L)
EXEC
(Execution window)
Sim8-6 TC OUTPUT
1:NML_A
4:SML_B
2:NML_B
5:BYPASS
3:SML_A
EXEC
2
Remark
Advertisement
