Safety And Instructional Decals - Toro BC-25 Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Warning—do not exceed 45 mph (72 kmh) when
transporting the machine.
1. Cutting/dismemberment hazard of hand; thrown object
hazard, face—stop the engine, remove the key and wait for
all moving parts to stop before opening the guard.
117–2718
119-4696
119-4720
1. Warning—read the Operator's Manual.
2. Warning—read the Operator's Manual, do not operate this
machine unless you are trained.
3. Thrown object hazard, face—wear eye protection.
4. Thrown object hazard—keep bystanders a safe distance
from the machine.
5. Cutting/dismemberment hazard of hand, blade—stay away
from moving parts, keep all guards and shields in place.
1. Warning—do not operate wearing gloves with loose
gauntlets, use gloves without loose material.
2. Warning—do not entangle body with material when using
machine.
3. Cutting/dismemberment hazard arm—do not place arm in
hopper; stay away from moving parts, keep all guards and
shields in place.
4. Thrown object hazard, face and body—do not let loose
material to escape from hopper, put shroud in place.
1. Rotational direction and spin indicator
6
119-4698
119-4699
117-1754