Coffee Temperature; Water Hardness; Selecting The Language; Beep - Whirlpool W11 CM145 Instructions For Use Manual

To disable or enable "Energy Saving", proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
pears on the display (B);
3. Press to enable-
ergy saving.
4. Press to go back to the homepage.
The corresponding symbol appears on the display alongside the
time to indicate that the function has been enabled.

Coffee temperature

To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
TURE appears on the display (B) together with the current
selection (LOW, MEDIUM, HIGH or MAXIMUM);
3. Press to select the required temperature;
4. Press to go back to the homepage.
A different temperature can be set for each profile (see section
"Memorising your personal profile").

Water hardness

For instructions on setting water hardness, see section "Setting
water hardness".

Selecting the language

To modify the language of the display (B), proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
pears on the display;
3. Press : press
corresponding to the required language;
4. Press twice to go back to the homepage.

Beep

This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
display (B);
3. Press to enable-
beep;
4. Press to go back to the homepage.
(B8) until ENERGY SAVING ap-
or disable-
(B8) until COFFEE TEMPERA-
(B8) until SET LANGUAGE ap-
or to display and select the flag
(B8) until BEEP appears on the
or disable-

Cup light

This function enables or disables the cup lights (A18). The lights
come on each time coffee beverages or hot milk is delivered and
during each rinse cycle.
en-
To disable or enable this function, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
pears on the display (B);
3. Press to enable-
cup lighting;
4. Press
The interior lighting (A6) comes on when the appliance is turned on.

Demo mode

By enabling this mode, the main functions of the machine are
shown on the display:
1. Press (B2) to enter the menu;
2. Press (B10) or
DEMO MODE;
3. Press to start the demo;
4. To exit from the DEMO MODE, first turn the appliance off
by pressing the button
button to go back to the homepage.

Default values

This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
appears on the display (B). Press
3. Press RESET ALL to reset all the profiles to the original pa-
rameters, otherwise select the required profile (e.g. USER 1);
4. RESET DEFAULT VALUES : press
to leave the parameters unaltered);
5. DEFAULT VALUES RESET : press
to go back to the homepage.

Statistics

This displays statistics relating to the machine. To display the
statistics, proceed as follows:
1. Press (B2) to enter the menu;
the
2. Press (B10) or
on the display (B);
3. Press to verify all the available statistics by pressing
or ;
18
(B8) until CUP LIGHTING ap-
or disable-
to go back to the homepage.
(B8) until the display shows
(A7), (fig.9). Press again the
(B8) until
;
(B8) until STATISTICS appears
the
DEFAULT VALUES
to confirm (or
to confirm and