Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for enware Oras Safira
Summary of Contents for enware Oras Safira
- Page 1 Enware-Oras Safira In-Wall Compact Shower Mixer Installation and Maintenance Instructions SAF608 I00346_Jun 20 Call 1300 369 273 www.enware.com.au Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: 02 8536 4000 info enware.com.au...
- Page 2 SAF608 Wall Depth 90 max 48 min ø90 MIXED OUT G1/2” HOT IN COLD IN G1/2” G1/2” All measurements are in millimetres. Call 1300 369 273 www.enware.com.au...
-
Page 3: Technical Data
Wall Depth 48 - 90mm installation compliance Enware products are to be installed in accordance with the Plumbing Code of Australia (PCA) and AS/NZS3500. Installations not complying with PCA and AS/NZS 3500 may void the product and performance warranty provisions. -
Page 4: Installation
IMAGE 01 The shower body has a protective cover which should be left on until the wall is finished. TO SHOWER OUTLET ° C + HOT / WARM SUPPLY ° C - COLD SUPPLY IMAGE 02 Call 1300 369 273 www.enware.com.au... - Page 5 SEE IMAGE 05 7. Push the handle plug onto handle. IMAGE 05 8. Turn water on and test for leaks. Test the mixer tap and check for correct operation. www.enware.com.au Call 1300 369 27...
-
Page 6: Operation
To limit to a lower flow (i.e. smaller handle lift angle), tighten the screw clockwise until the screw protrudes past the spindle on the other side. The screw limits the travel of the lever handle. SEE IMAGE 07 IMAGE 07 Call 1300 369 273 www.enware.com.au... - Page 7 Pull out the regulating shaft with its white limiters (6). Adjust the position of the white limiters to the required angle. Moving the front limiter to the left will reduce the limit on the maximum hot water temperature. °C+ IMAGE 08 www.enware.com.au Call 1300 369 27...
-
Page 8: Maintenance
CLEANING Enware products should be cleaned with a soft damp cloth using only mild liquid detergent or soap and water. Do not use cleaning agents containing a corrosive acid, scouring agent or solvent chemicals. Do not use cream cleaners, as they are abrasive. - Page 9 2. Screw cartridge fixing nut into mixer body and tighten using the cartridge key or 38mm socket wrench. 3. Fit cover cap and handle components back For specific problems such as a leaking tap refer to Troubleshooting on page 11 for instructions. www.enware.com.au Call 1300 369 27...
-
Page 10: Spare Parts
Safira Handle Fixing Kit 891540 Handle Plug (each) SLMS635 Cover Plate and Chrome Sleeve 891535 Cartridge Fixing Nut SLMS606 Oras Cartridge with O-ring SLMS690 Sleeve Sealing O-ring In-Wall Shower Assembly 891534 Oras Cartridge Key SLMS622 Call 1300 369 273 www.enware.com.au... -
Page 11: Troubleshooting
Install an inline strainer. Clean check valve. Hot water flows when Hot and cold connections Reconnect hot and cold handle is turned anti- are incorrect. supply correctly to mixer. clockwise. www.enware.com.au Call 1300 369 27... -
Page 12: Making A Claim
. other conditions All notifications and accompanying forms must be sent to us marked for the attention of the Enware Australia Pty Except as provided or referred to in this document, we Limited, 9 Endeavour Road, Caringbah NSW 2229. We...
Need help?
Do you have a question about the Oras Safira and is the answer not in the manual?
Questions and answers