Sony SAT-W60 Service Manual page 8

Satellite Receiver
OPTIONS Displays the OPTIONS panel.
RECENT Displays and allows you to access the
most recently viewed Web pages and
TV channels.
SCROLL V/v
Moves the page up or down when the
Buttons page is too long to be displayed on the
screen.
HOME Displays the Web Home or TV Home
screen.
BACK Displays the last screen viewed, or
hides the on-screen keyboard.
TV/WEB Press the button to switch between TV
and WebTV modes.
Arrow Buttons Move the yellow highlight box to a
different command or activity on the
screen; select different keys when the
on-screen keyboard is displayed.
MY SHOWS Displays a list of programs that you
have recorded with your Satellite
Receiver.
INFO
Displays information on the program
you are viewing.
GUIDE
Displays information on available
programs, including channel, time
and date.
Button Activates a highlighted link or
command; displays the on-screen
keyboard.
VOL +/– Increases and decreases the volume.
CH +/–
Moves to the next or previous channel.
CODE SET Used for programming the remote
control to operate your TV. See
page 21 for details.
20
Satellite Receiver
Troubleshooting
Symptom Possible Cause and remedies
TV POWER button The remote control has not been properly programmed.
doesn't turn on TV. See "Setting up the Remote Control" on page 21.
The batteries in the remote control or wireless keyboard
could be weak. Check the batteries and replace them if
necessary.
No picture, no sound. Make sure the AC Power Cord is connected.
Check that the TV/VIDEO switch is set correctly.
Make sure the Satellite Receiver is properly connected.
If you connected using a S-Video or A/V cables, make
sure they are properly connected.
If your TV must be set to a certain channel to view other
devices to which it is connected, make sure this channel
is selected.
Check that the correct video input is selected by
pressing the TV/VIDEO button.
If your TV is not connected using the S-Video or A/V
cables, set the CH3-CH4 switch on the back of the
Satellite Receiver to the opposite channel to which it is
currently set.
No sound. If you connected the Satellite Receiver using A/V
cables, make sure the cables are properly connected.
Can't change TV Make sure you select the TV FUNCTION button.
channels while using
WebTV service.
The WebTV service Press the TV/VIDEO button on the remote control until
screens disappear the WebTV screen appears.
after pressing the
–
CHANNEL +/
buttons.
VCR Control doesn't Check that the IR Blaster is positioned directly in front
seem to be working of the infrared sensor area of your cable box and/or
correctly. VCR.
Follow the on-line instructions in the "Settings" link,
accessible from the TV Home page of the WebTV
service.
26