Sony SAT-W60 Service Manual page 6

Satellite Receiver
Advanced Connection: Connecting Your IR
Blaster
Satellite Receiver
1 1
VCR (front) IR Sensor
2
1 / " to 1 "
2
z Tip
If the infrared sensor is not
marked on your VCR, shine a
flashlight into the front panel of
the VCR to locate the sensor.
14
To allow the Satellite
Receiver to control your VCR
Connect the IR Blaster to the VCR
CONTROL jack on the Satellite
Receiver.
In front of the VCR
2
Place the IR Blaster under and
in front of the VCR.
The IR Blaster must extend just
in front of the infrared sensor
of the VCR.
Connecting Your Satellite Receiver
Advanced Connection: Connecting an Audio
System
If you have a digital or Dolby
1
Audio Receiver
Digital audio system
Connect the DIGITAL OUT (OPTICAL)
of the Satellite Receiver to the optical
digital input of your audio system.
1
Satellite Receiver
z Tip
If you connect your Satellite Receiver to a Dolby
Digital receiver, set the Dolby Digital option of the
Audio display to Auto Select.
Advanced Connection: Connecting a Microphone
Satellite Receiver
GUIDE HOME
PUSH PUSH
SATELLITE RECEIVER SAT-W60
If you have a Microphone
1
First, remove the cover from the
microphone jack, then connect the
microphone plug to the Satellite
Receiver's Microphone IN jack.
z Tip
Check "Help" screen for a list of
compatible microphones.
1
15