Kioti DK6010 Owner's Manual
  1. Manuals
  2. Brands
  3. Kioti Manuals
  4. Tractor
  5. DK6010
  6. Owner's manual

Kioti DK6010 Owner's Manual

Hide thumbs Also See for DK6010:
Table of Contents

Advertisement

Quick Links

Congratulations, and welcome to the fabulous world of DK6010 ownership, where serious work is made fun
again!
This versatile tractor is a culmination of the entire tractor and diesel engine knowledge gained by the Dae-
dong Industrial Co.,LTD over the years since 1947. The DK6010 and has been designed with the finest ma-
terials and under rigid quality control standards set forth by the KIOTI Engineering Department.
Knowledge of tractor operation is essential for many years of dependable service and reliability. To help new
owner's familiarize themselves with the KIOTI DK6010, it is the policy of KIOTI tractor to provide an owner's
manual which includes helpful information about tractor safety, operation and maintenance. If the information
you seek is not found in this manual, your KIOTI tractor dealer will be happy to help you.
Please feel free to contact DAEDONG IND. CO.,LTD with your questions/concerns.
< NOTE >
Make sure to read this manual carefully and keep it handy for future reference.
When leasing or transferring this tractor, deliver this manual together with the tractor.
The specifications in this manual are subject to change without notice.
TD210-EEC인증용-DK6010H,DK6010C,DK61 1
FOREWORD
2018-12-26 오전 10:30:38

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DK6010 and is the answer not in the manual?

Questions and answers

Related Manuals for Kioti DK6010

Summary of Contents for Kioti DK6010

  • Page 1 This versatile tractor is a culmination of the entire tractor and diesel engine knowledge gained by the Dae- dong Industrial Co.,LTD over the years since 1947. The DK6010 and has been designed with the finest ma- terials and under rigid quality control standards set forth by the KIOTI Engineering Department.
  • Page 2 ISO 3600 EU STANDARDS This manual was compiled in compliance with the ISO 3600, standards and the instructions contained here comply with the requirements of the Machinery Directive 2010/52/EU in force in the European Community. For tractors sold or used outside the European Community, local laws will prevail.
  • Page 3 TABLE OF CONTENTS SAFETY PRECAUTIONS ........ PRECAUTIONS BEFORE OPERATION ..SPECIFICATIONS ..........DESCRIPTION OF OPERATING SYSTEM ..SECTION OPERATION ............ 3- POINT HITCH IMPLEMENT OPERATION ..MAINTENANCE ..........STORAGE AND DISPOSAL ......TROUBLESHOOTING ........INDEX............... TD210-EEC인증용-DK6010H,DK6010C,DK63 3 2018-12-26 오전 10:30:38...

  • Page 4: Table Of Contents

    TABLE OF CONTENTS SAFETY PRECAUTIONS ........1-1 CaUTIOnS FOR DECaL MaInTEnanCE ....1-31 PRECAUTIONS BEFORE OPERATION .....2-1 PRECAUTIONS BEFORE OPERATION ....1-2 vEHICLE IDENTIFICATION NUMBER ..... 2-2 GEnERaL PRECaUTIOnS ..........1-2 RISK OF OvERTURnInG ..........1-6 TRaCTOR SERIaL nUMBER ......... 2-2 EnGInE SERIaL nUMBER ..........
  • Page 5 TABLE OF CONTENTS DRIvING SPEED TABLE ........3-10 InSTRUMEnT CLUSTER FEaTURES ......4-16 TaChOMETER/hOURMETER ........4-17 IMPLEMENT LIMITATIONS ........3-12 FUEL GaUGE ..............4-17 STanDaRD IMPLEMEnT DIMEnSIOnS ..... 3-12 EnGInE COOLanT TEMPERaTURE GaUGE ..... 4-18 RECOMMEnDED TIRE-SET ........3-15 TURn SIGnaL LaMP ............ 4-18 BaTTERY ChaRGInG LaMP ........
  • Page 6 TABLE OF CONTENTS BRaKE (OnE SIDE) LaMP ........... 4-27 LInKED PEDaL LEvER (OPTIOnaL) ......4-40 ERROR InDICaTOR ............. 4-28 FROnT W hEEL DRIvE LEvER ........4-41 ExTERnaL LIFT LEvER ..........4-41 OPERATING THE CONTROLS ......4-29 CABIN SYSTEM ............. 4-42 MaIn ShIFT LEvER ............
  • Page 7 TABLE OF CONTENTS TREaD................4-57 PRECaUTIOnS WhEn COMInG In anD OUT OF WORK FIELD ............. 5-18 WhEEL TORQUE anD DIRECTIOn ......4-58 PRECaUTIOnS WhILE DRIvInG On ThE ROaD ..5-18 aDDITIOnaL WEIGhT (OPTIOn) ......... 4-60 LOaDInG InTO anD UnLOaDInG OUT OF ThE OPERATION ............5-1 TRUCK ...............
  • Page 8 TABLE OF CONTENTS PTO & PTO ShIELD GUaRD .......... 6-9 ChECKInG COOLanT LEvEL (F) ........ 7-14 hYDRaULIC BRaKE vaLvE(IF EQUIPPED) ....6-9 CLEanInG GRILL, RaDIaTOR SCREEn (G) ....7-14 InSTaLLInG PTO ShaFT ..........6-11 ChECKInG BRaKE anD CLUTCh PEDaLS (h) ..7-15 ChECKInG GaUGES, METER anD InDICaTORS (I) 7-15 HANDLING LOADER ..........
  • Page 9 TABLE OF CONTENTS TROUBLESHOOTING .........9-1 POWER STEERInG LInE (aa) ........7-30 aDJUSTInG FROnT axLE PIvOT PIn (aD) ....7-30 ENGINE TROUBLESHOOTING ....... 9-2 aDJUSTInG EnGInE vaLvE CLEaRanCE (aE) ..7-30 REPLaCInG aIR CLEanER FILTER (aF) ....7-31 TRACTOR TROUBLESHOOTING ......9-4 ChECK anD CLEan CaB aIR InTaKE FILTER ...
  • Page 10 SAFETY AND vEHICLE DAMAGE WARNING This manual includes information titled as WARNING, CAUTION, IMPORTANT and NOTE. These titles indicate the following: This indicates that a condition may result in harm, serious injury or death to you or other persons if the warning is not heeded.
  • Page 11 UNIvERSAL SYMBOLS various universal symbols have been used on the instruments and controls of your KIOTI tractor. Below is a list of the universal symbols and their meanings. Low Fuel Warning Light QT lamp hight Temperature Coolant Temperature Preheat Low Temperature...
  • Page 12 TD210-EEC인증용-DK6010H,DK6010C,DK612 12 2018-12-26 오전 10:30:40...
  • Page 13 safety Precautions Precautions before oPeration ...... 1-2 General precautions ............1-2 risk of overturninG ............1-6 Precautions during oPeration ....... 1-9 When drivinG the tractor ..........1-13 When parkinG the tractor ..........1-14 When operatinG the p.t.o ..........1-15 When usinG the 3-point hitch ........1-16 safety Precautions during servicing ..

  • Page 14: Precautions Before Operation

    Precautions before oPeration general Precautions a careful operator is the best opera- tor. most accidents can be avoided safety helmet by observing certain precautions. to help prevent accidents, use these fit clothes safety precautions, and pay attention to the job at hand. if you can prevent...
  • Page 15 safetY precautions safetY precautions this tractor should be operated, ser- vice and repaired by a well-trained and skilled technician who is also aware of accompanying danger. it is necessary to follow any applicable accident prevention practices, general health and safety standards and traffic regulations.
  • Page 16 18. No modifications should be made should always be used. this will to your Kioti tractor. help to prevent accidental slips trips and falls. 15. Be sure to scrape off mud or soil from your shoes before mounting the tractor.
  • Page 17 safetY precautions safetY precautions 20. for your safety roPs with a seat belt is recommended for all applications. note • always use seat belt when the tractor is equipped with a roPs and cab. never use the seat belt when tractor is not equipped with a roPs.

  • Page 18: Risk Of Overturning

    • the safe working practices listed hereunder concerns only a few cases of overturn- ing risk. • the list is therefore not com- prehensive of all possible cases. Tg2O103a Tg2O104a for your safety, tractors must be to avoid side overturning: equipped with original safety belts.
  • Page 19 safetY precautions safetY precautions • reduce your speed before making wide turns. do not let the tractor jump or bounce on rough terrains. You could lose control. • don't pull a load too heavy for your tractor. it could run away on the down slope or the tractor could jack-knife around a towed load.
  • Page 20 Tg2O107a Tg2O108a Tg2O109a • if you need cross a steep slope, • When driving across a slope with • avoid crossing steep slopes if pos- do not steer uphill, but slow down mounted implements, keep such sible. if you must do so, avoid any and take a wide turn.

  • Page 21: Precautions During Operation

    safetY precautions safetY precautions Precautions during oPeration H11O109a T66O108a T66O109a 1. enter or leave the tractor leftward 2. avoid accidental contact with gear 3. do not park your tractor on a steep griping hand rail on a fender. shift levers while the engine is run- incline, and remember to shut off ning.
  • Page 22 Td2O110a M55O117a T66O110a (1) height control hitch (2) towing hook 4. do not operate your tractor in 5. make sure that all pressure lines 7. improper use of the draw-bar, even an enclosed building without the are tight before starting the tractor.
  • Page 23 safetY precautions safetY precautions 11. a safety chain will help control drawn equipment should it be accidentally separated from the draw-bar while transporting. using the proper adaptor parts, attach the chain to the tractor draw-bar support or other specified anchor locations.
  • Page 24 15. do not leave implements and at- tachments in the raised position when the vehicle is stopped or unattended. 16. When using implements or at- tachments with your tractor you should first read their respective owner's manual. You should al- ways keep their safe operation procedures in mind.

  • Page 25: When Driving The Tractor

    safetY precautions safetY precautions when driving the tractor T66O115a T66O118a TE1O481a (1) Brake pedal (l) (2) Brake pedal (r) (3) Brake lock 21. When working in groups, always 2. always slow the tractor before (a) lock (B) unlock let the others know what you are turning.

  • Page 26: When Parking The Tractor

    ParKing the tractor 4. Observe all local traffic and safe- ty regulations. 5. turn the headlights on. dim them when meeting another ve- hicle. 6. drive at speeds that allow you to maintain control at all times.

  • Page 27: When Operating The P.t.o

    safetY precautions safetY precautions when oPerating the P.t.o 3. Before installing or using p.t.o warning driven equipment, read the man- • ensure that implements and ufacturer's manual and review the attachments are properly in- safety labels attached to the equip- stalled and that the tractor and ment.

  • Page 28: When Using The 3-Point Hitch

    Precautions during servicing when using the 3-Point hitch T66O122a T66O124a te1o4c1a (1) 3-point hitch lowering speed knob (a) fast (B) sloW 1. use the 3-point hitch only with 4. When operating stationary p.t.o in order to service your tractor you...
  • Page 29 safetY precautions safetY precautions T66O125a T66O126a M55O114a 2. allow the tractor time to cool off 6. do not remove the radiator cap 7. if the tractor must be lifted for before servicing any part that may while the coolant is hot. When servicing, take it to a suitably have become hot while the tractor cool, slowly rotate the cap to the...
  • Page 30 • apply the jack lift to the lifting points according to the type of operation and follow the safety procedures given before. M55O115a T66O127a 10. Use floor jack of suitable capac- 12. When working with your trac-...
  • Page 31 safetY precautions safetY precautions Before pressurizing to the hy- draulic system, make sure that all connections are tight and that all line, pipes and hoses are free of damage. T66O128a T66O129a (1) cardboard (2) hydraulic line (3) magnifying Glass 14. tire mounting should be done by 17.

  • Page 32: Safety Precautions When Using The Loader

    Precautions when using the loader T66O130a T66O131a H11O102a 19. fluid leaking from pinholes may 20. keep environmental pollution in 1. never let anyone get in the loader be invisible. do not use hands to mind. When replacing coolant or and use the loader as a work- search for suspected leaks;...
  • Page 33 safetY precautions safetY precautions H11O103a H11O104a H11O105a 2. do not stand under the lifted load- 3. the loader can be turned over if a 4. never carry a big object with the er or get close to it. also, lower draw-bar is improperly loaded.
  • Page 34 H11O106a H11O107a H11O108a 5. When attaching or detaching the 6. do not allow loader arms or attach- 7. keep bystanders away. no riders. loader, fit parts which are con- ment to contact electrical power nected to the bucket and boom.

  • Page 35: Implements And Attachments

    safetY precautions safetY precautions imPlements and attachments WARNING imPortant • • use exclusively front loader Keep the loader's operation approved by the tractor's man- manual together with the trac- ufacturer, with ce mark and tor's manual, always at hand parallelogram type. in the storage compartment of •...
  • Page 36 • three-point hitch and side mounted swinging and shaking during trans- implements make a much larger port and work that could jeopardize arc when turning than towed equip- the stability of the tractorimplement ment. make certain to maintain assembly.
  • Page 37 safetY precautions safetY precautions to reduce risks, the following precau- • check for correct coupling between tions should be used. tow hook and trailer. see the tow- ing attachments section. - only use loader equipped with a load self-levelling system, i.e. of the •...

  • Page 38: Cleaning The Tractor

    • keep work surfaces and engine compartments clean. • Before cleaning the machine, always lower implements to the ground, engage the first gear, engage the parking brake, turn the engine off and re- move the key.

  • Page 39: Safety Decal Maintenance

    safetY precautions safetY precautions safety decal maintenance decal mounting location [roPs] d21O102a TD210-EEC인증용-DK6010H,DK6010C,DK627 27 2018-04-20 오후 1:20:44...
  • Page 40 [cabin] d21O103a TD210-EEC인증용-DK6010H,DK6010C,DK628 28 2018-04-20 오후 1:20:45...

  • Page 41: Decals

    safetY precautions safetY precautions decals (1) part no.: t4930-52481 (2) part no.: t4682-53552 (3) part no.: t4930-52351 warning warning danger flammables engage release stop the engine before fueling use diesel fuel only connecting hook make sure to interlock the left and right ●...
  • Page 42 (5) part no.: t2555-52141 (6) part no.: t4625-52351 (7) part no.: t4930-52471 warning WARNING do not run the engine Before starting and operating in a poorly ventilated Know the operating and safety instructions area. in the operators manual and on the tractor.

  • Page 43: Cautions For Decal Maintenance

    safetY precautions safetY precautions cautions for decal main- tenance (9) part no.: f6800-29112 safety decals are attached to the (8) part no.: t4930-52311 tractor for safe operation. make sure to follow the instruction on the decals This tractor is equipped with a DPF(Diesel Particulate Filter). warning Use the CJ-4 grade Engine oil.
  • Page 44 • if a decal is damaged or lost, contact your local Kioti deal- er immediately to install a new decal. • make sure to attach the decal in the correct position cleanly without bubbles after cleaning its mounting surface.
  • Page 45 PRECAUTIONS BEFORE OPERATION VEhIClE IdENTIFICATION NUmBER ......2-2 TRACTOR SERIAL NUMBER .............2-2 ENgINE SERIAL NUMBER ............2-2 TRANSMISSION NUMBER ............2-2 ESSENTIAl REPlACEmENT PARTS ......2-4 OILS ANd fLUIdS ..............2-4 fILTERS ..................2-4 BELTS ANd RUBBER pARTS.............2-5 OThER COMpONENTS .............2-5 TD210-EEC인증용-DK6010H,DK6010C,DK61 1 2018-11-28 오후 1:21:07...

  • Page 46: Vehicle Identification Number

    VEhIClE IdENTIFICATION NUmBER TRANSmISSION NUmBER TRACTOR SERIAl NUmBER ENgINE SERIAl NUmBER TD2O201A D21O201A H61O203A (1) Tractor Serial Number plate (1) Engine Identification Plate (1) Transmission Serial Number (2) Engine Serial Number This number is to identify the vehicle, Engine identification plate is installed...
  • Page 47 Engine Serial No: however, when in need of parts,  warranty or major service, be sure to see your KIOTI dealer. for service, date of Purchase:  contact the KIOTI dealership from which you purchased your tractor or your local authorized KIOTI dealer.

  • Page 48: Essential Replacement Parts

    ESSENTIAl REPlACEmENT PARTS OIlS ANd FlUIdS FIlTERS Various oils and fluids are used in this tractor for operation, lubrication, cool- ing, and anti-corrosion of various parts. If oil or fluid is insufficient, contami- nated or degraded, it can cause poor...

  • Page 49: Belts And Rubber Parts

    pRECAUTIONS BEfORE OpERATION BElTS ANd RUBBER PARTS OThER COmPONENTS part No. Part 1 E6201-32443 Engine oil filter 2 T5710-38031 Hydraulic filter T4624-11012 Air Cleaner Ass’y 4 E7230-11081 Air Cleaner Element Fuel filter Ass’y 5A T4682-25732 (B series) Fuel filter Ass’y 5B f5805-16402 H11O206A H11O207A...
  • Page 50 MEMO mEmO TD210-EEC인증용-DK6010H,DK6010C,DK66 6 2018-11-28 오후 1:21:10...

  • Page 51: Specifications

    SpecificationS General SpecificationS ........3-2 ExtErnal dimEnsions ............3-2 GEnEral spEcifications .............3-4 option list ................3-7 noisE lEvEls as pErcEivEd by thE opErator .....3-8 vibration lEvEls of thE tractor Exposition to vibrations ................3-9 DrivinG SpeeD table ..........3-10 iMpleMent liMitationS ........3-12 standard implEmEnt dimEnsions .........3-12 rEcommEndEd tirE-sEt ............3-15 TD210-EEC인증용-DK6010H,DK6010C,DK61 1...

  • Page 52: General Specifications

    General SpecificationS external DiMenSionS mm (in.) ropS ropS MoDel iteM DK6010H DK6010n 1. overall length (a1) 3.320 (130,7) 3.587 (141,2) 2. overall length (a2) 3.189 (125,5) 3.288 (129,4) 3. overall width (b) 1.596 (62,8) 1.486 (58,5) 4. overall height (c) 2.430 (95,7)
  • Page 53 spEcifications mm (in.) cabin cabin MoDel iteM DK6010c / DK6010cH 1. overall length (a1) 3.320 (130,7) 2. overall length (a2) 3.189 (125,5) 3. overall width (b) 1.596 (62,8) 4. overall height (c) 2.363 (93,0) 5. Wheel base (d) 1.810 (71,3) 6.

  • Page 54: General Specifications

    General SpecificationS ※ n: narrow type MoDel iteM DK6010H DK6010cH DK6010c DK6010n Engine type 3ht 4318-2655 daedong engine type 3ft-thl4-E 3ft-thl4-E 3ft-tl4-E1 3ft-tl4-E number of cylinders total displacement cc (cu) 1.826 (111,3) bore and stroke mm (in.) 87 × 102,4 (3,4 × 4)
  • Page 55 spEcifications ※ n: narrow type MoDel iteM DK6010H DK6010cH DK6010c DK6010n range constant mesh, 3 constant mesh, 4 transmission speeds Infinite 16f x 16r forward 0 - 29,7 (0 - 18,45) 0,34 - 32,5 (0,21 - 20,19) Ground speed (tire for agricultural) km/h (mph) reverse 0 - 20,8 (0 - 12,92)
  • Page 56 ※ n: narrow type MoDel iteM DK6010H DK6010cH DK6010c DK6010n type independent rear pto shaft saE 1-3/8, 6 splines speed 540/750 540/540E min. turning radius mm (in.) 2.630 (103,5) 3.420 (134,6) (with one rear wheel braked) Weight kg (lbs.) 1.598 (3.523)

  • Page 57: Option List

    spEcifications option liSt ※ n: narrow type Models DK6010H DK6010cH DK6010c DK6010n optional part front Weight ○ ○ ○ ○ rear Weight ○ ○ ○ ○ front Work light ○ std. std. ○ rear Work light ○ std. std. ○ beacon ○...

  • Page 58: Noise Levels As Perceived By The Operator

    (EU) no 1322/2014 - annex xiii (without load) tractors type noise level at the operator’s ear...

  • Page 59: Vibration Levels Of The Tractor Exposition To Vibrations

    spEcifications vibration levelS of tHe tractor expoSition to vibrationS WarninG the vibration level transmitted to the body as a whole depend on different parameters, some of them relat- • ing to the machine, others to the terrain and many specific for the operator. The prevailing parameters are the type of terrain or work surface and the ground speed.

  • Page 60: Driving Speed Table

    DrivinG SpeeD table km/h (mph) [DK6010c / DK6010n] tire sizes ranGe Main SHift 13.6-24 6pr SHift forward reverse 0,34 (0,21) 0,33 (0,21) 0,45 (0,28) 0,44 (0,27) creep speed 0,78 (0,48) 0,76 (0,47) 1,06 (0,66) 1,03 (0,64) 1,3 (0,81) 1,3 (0,81)
  • Page 61 spEcifications km/h (mph) [DK6010H / DK6010cH] tire sizes 13.6-24 6pr (aG) ranGe SHift forward reverse 0 ~ 6,92 (0 ~ 4,30) 0 ~ 5,40 (0 ~ 3,56) 0 ~ 12,5 (0 ~ 7,77) 0 ~ 9,74 (0 ~ 6,05) 0 ~ 28,5 (0 ~ 17,71) 0 ~ 22,3 (0 ~ 13,86) ※...

  • Page 62: Implement Limitations

    Kioti and which exceed the maximum specifications listed below, or which are otherwise unfit for use with this Kioti tractor may result in malfunctions or failures to the tractor, damage to other property and injury to the operator or others. [Any malfunctions or failures to the tractor resulting from use with improper implements are not covered by the warranty.]...
  • Page 63 spEcifications Actual figures trailer loading weight item implement weight W and / Model max. drawbar load W Max. capacity or size as in the following list 750 kg (1.650 lbs.) 4.300 kg (9.480 lbs.) (shown on the next page) lifting capacity max. loading weight ..... the max. allowable load which can be put on the 24 in. aft of hitch : W implement weight ..........
  • Page 64 (in.) iMpleMent DeScription DK6010 reMarKS 1. loader max. bucket width 1.676 (66) 2. backhoe with sub frame max. digging depth 2.280 (89,7) do not use 3 point hitch backhoe 3. tiller max. Width 1.656 (65,2) 4. box blade max.

  • Page 65: Recommended Tire-Set

    spEcifications recoMMenDeD tire-Set norMal type narroW type front 8 - 16 front 8 - 16 sEt 1 sEt 1 rear 12,4 - 24 rear 12,4 - 24 front 9,5 - 16 front 9,5 - 16 sEt 2 sEt 2 rear 13,6 - 24 rear 13,6 - 24...
  • Page 66 MEMO MeMo TD210-EEC인증용-DK6010H,DK6010C,DK616 16 2018-12-28 오전 10:19:49...

  • Page 67: Function Description And Operating Tips

    Function description and operating tips exterior view ......... 4-3 glow plug indicator ......4-19 engine oil pressure warning laMp .. 4-20 switches ........... 4-5 QuicK / turn warning laMp (iF eQuipped)..........4-20 Mounting location ....... 4-5 4wd indicator (iF eQuipped) ....4-21 Key switch ..........
  • Page 68 Function description and operating tips range shiFt lever ....... 4-31 interior devices ........4-42 shuttle shiFt lever ......4-32 eXterior devices......... 4-43 pto shiFt lever ........4-32 entrance ..........4-44 clutch pedal ........4-33 unlocKing the door ......4-44 braKe pedal ........... 4-33 rear window .........

  • Page 69: Exterior View

    Function description and oper- Function description and operating tips exterior view [rops] d21o401a (1) seat (5) rops (9) lower link (2) steering wheel (6) turn signal lamp (10) drawbar (3) bonnet (7) Fender handle (11) pto shaft (4) headlight (8) top link (12) rear view Mirror TD210-EEC인증용-DK6010H,DK6010C,DK63 3 2018-11-28 오후...
  • Page 70 [cabin] d21o402a (1) work lamp (6) bonnet (11) drawbar (2) wiper (7) head lamp (12) tail lamp (3) rear view Mirror (8) top link (13) step (4) turn signal lamp (9) pto shaft (5) door handle (10) lower link TD210-EEC인증용-DK6010H,DK6010C,DK64 4...

  • Page 71: Switches

    Function description and operating tips switches mounting location [rops] d21o405a (1) combination switch (2) dpF regeneration switch (3) pto setting switch (4) cruise pto switch (5) hazard warning Flasher switch (6) Key switch (7) speed cruise control switch (option) (8) pto switch (on/oFF) d21o404a TD210-EEC인증용-DK6010H,DK6010C,DK65 5 2018-11-28 오후...
  • Page 72 [cabin] d21o406a (1) combination switch (2) dpF regeneration switch (3) pto setting switch (4) cruise pto switch (5) hazard warning Flasher switch (6) Key switch (7) pto switch (on/oFF) d21o403a TD210-EEC인증용-DK6010H,DK6010C,DK66 6 2018-11-28 오후 1:50:57...

  • Page 73: Key Switch

    Function description and operating tips Key switch acc (b) start (d)   when the key switch is turned to the position "d" indicates "start". the position "B", brake lights, flasher in order to start the engine, turn the lights and turn signal lights can be pto switch off.

  • Page 74: Combination Switch

    • stop the engine immediately if the oil pressure warning lamp does not go off after the engine is started. the engine may be severely damaged. • if the battery charge warning lamp does not go off after the...

  • Page 75: Hazard Lamp Switch

    Function description and operating tips hazard lamp switch turn signal light switch horn switch td2o407s td2o408s td2o409s (1) turn signal light switch (1) horn switch (1) hazard warning Flasher switch (a) right turn (b) left turn (a) on (b) oFF the turn signal lights are used when the horn switch can be operated this switch can be used to warn...

  • Page 76: Fwd/Quick-Turn Switch

    Fwd/QuicK-turn switch caution switch turning lamp position • if the hazard lamps are turned on normal turning lamp oFF for an extended period of time while the engine is stopped, the battery can be discharged. there- lamp on normal turning fore, use them only in emergency.
  • Page 77 Function description and operating tips 4wd operation how to use QuicK-turn Function caution the 4wd function is used to in- 1. to activate the quick-turn function, to avoid accidents: crease traction power by driving the press the switch downward. • do not activate the 4wd func- front and rear wheels (4 wheels).

  • Page 78: Pto Cruise

    7. if your work requires mid to high run the engine at a speed over 1,300 load applied to the front loader or rpM. set the desired engine speed. four wheels, using the quick-turn...

  • Page 79: Dpf Regeneration Switch

    Function description and operating tips dpF regeneration switch how to deactivate pto cruise depress the brake or clutch pedal or then, press the activation portion turn off the pto cruise switch to de- of the regeneration switch for ap- activate the function. prox.

  • Page 80: Pto Switch (On / Off)

    (on / oFF) caution caution To protect the catalyst filter, keep to avoid personal injury and the followings: accident: • make sure to use only speci- • b e f o r e d i s a s s e m b l i n g o r fied fuel.

  • Page 81: Pto Cruise Setting Switch

    Function description and operating tips pto cruise setting switch • res(+) : speed is increased by 50 rpM when pressing it. • set(-) : speed is decreased by 50 rpM when pressing it. pto cruise deactivation depress the brake pedal or set the pto cruise switch to the "oFF"...

  • Page 82: Instrument Cluster

    Features symbols on the instrument panel come on when the key switch is turned to the “on” position. 17 23 18 11 10 15 21 20 25 26 27 28 29 19 32 13 12...

  • Page 83: Tachometer/Hourmeter

    Function description and operating tips tachometer/hourmeter Fuel gauge note • Make sure to use only ultra low sulfur oil for automobiles as the engine can be damaged if un- qualified fuel is used. • use fuel for winter season in cold weather to start the engine easier.

  • Page 84: Engine Coolant Temperature Gauge

    • make sure to control the work load so that the needle is not in the red zone. • if the needle stays in the red zone, do not stop the engine immediately.

  • Page 85: Battery Charging Lamp

    Kioti dealer or workshop as soon as possible. TD210-EEC인증용-DK6010H,DK6010C,DK619 19 2018-11-28 오후 1:51:15...

  • Page 86: Engine Oil Pressure Warning Lamp

    4wd operation. specified engine oil level, have the tractor checked by your local Kioti dealer or workshop immediately. TD210-EEC인증용-DK6010H,DK6010C,DK620 20 2018-11-28 오후 1:51:18...

  • Page 87: 4Wd Indicator (If Equipped)

    Function description and operating tips 4wd indicator (iF eQuipped) h indicator (iF eQuipped) For the safety reason, this is acti- vated only when the range shift gear is not in the low speed position. using the one-side brake on the cor- responding side with the quick-turn function can further reduce the turn- ing radius.

  • Page 88: L Indicator (If Equipped)

    (iF eQuipped) pto indicator caution s e t t h e p to s w i t c h t o t h e  "oFF" position in order to start the engine. td2o414e td2o415e if the range shift is at low speed, this this indicator shows the pto en- lamp turned in green.

  • Page 89: Parking Brake Lamp

    Kioti dealer immediately. if this indicator is on even with  on, add fuel immediately. the parking brake released,...

  • Page 90: Water In Fuel Warning Lamp

    Fuel warning lamp dpF regeneration warning dpF regeneration under- lamp way lamp td2o419e td2o420e td2o421e when a certain amount of water (ap- if carbon is accumulated in the ex- this lamp comes on while the regen- prox. 45 cc) is accumulated in the fuel...
  • Page 91 Function description and operating tips dpF regeneration warning lamp warning do not touch or come near the • dpF part during the regenera- FLASHED tion process as its surround- ing area is hot. if not, you can get burnt. td2o422e td2o423e 1.

  • Page 92: Engine Check Warning Lamp

    • not met during regeneration, the or higher if you can see the flashing lamp, regeneration mode is deactivated. please contact to your Kioti dealer. passive regeneration prohibited other general operation can- • engine rpM limit (below 1.500 not be performed during the rpm) manual regeneration process.

  • Page 93: Cruise Pto Warning Lamp

    Function description and operating tips cruise pto warning lamp braKe (one side) lamp this lamp indicates the operating status of the brake (one side). this CRUISE comes on when the brake lock for two brake pedals is unlocked. important • when driving on a public road or at a high speed, never use only one brake pedal.

  • Page 94: Error Indicator

    Kioti dealer. if an error occurs, error code is dis- tcu001 clutch pedal sensor played on the hourmeter of the lcd window.

  • Page 95: Operating The Controls

    Function description and operating tips operating the controls (1) hand throttle lever (2) parking brake lever (3) brake pedal (lh) (4) brake pedal (rh) (5) Forward driving pedal (6) reverse driving pedal (7) range shift lever (8) lift position control lever (9) double acting lever (10) tilt control lever (11) linked pedal lever (option)
  • Page 96 [cabin] d21o407b (1) hand throttle lever (5) Forward driving pedal (9) 2wd/4wd lever (2) parking brake lever (6) reverse driving pedal (10) tilt control lever (3) brake pedal (lh) (7) range shift lever (11) switch panel (4) brake pedal (rh) (8) lift position control lever TD210-EEC인증용-DK6010H,DK6010C,DK630 30...

  • Page 97: Main Shift Lever

    Function description and operating tips main shiFt lever range shiFt lever manual manual td2o438a td2o439b d21o411a (1) Main shift lever (1) range shift lever (1) range shift lever Four speeds can be selected by high speed, mid speed, low speed high speed, mid speed and low moving this main shift lever in “h”...

  • Page 98: Shuttle Shift Lever

    • make sure to operate the shut- tle shift lever only while the ve- hicle is stationary. otherwise, the vehicle may turn abruptly, resulting in a personal injury and transmission damage. td2o440a...

  • Page 99: Clutch Pedal

    Function description and operating tips clutch pedal braKe pedal 1. Make sure to latch the left and right manual manual brake pedals as shown in the figure while driving on a road. the tractor can roll over if depressing only one brake pedal at a high speed.

  • Page 100: Parking Brake Lever

    Foot throttle with the brake pedal depressed, pull manual up the parking brake lever to apply the parking brake. to release the brake, depress the brake pedal firmly. caution • if the vehicle is driven with the...

  • Page 101: Forward / Reverse Driving Pedals

    Function description and operating tips Forward / reverse driving hand throttle lever pedals caution • do not use the hand throttle 1 1 1 1 lever while driving on the pub- lic road. otherwise it can lead to an accident as it becomes hard to decelerate the tractor rapidly.

  • Page 102: Steering Wheel Adjustment

    • the differential lock should be engaged only while the driving clutch is engaged. if the differ- ential lock pedal does not move when depressing it, try to de- press it again after releasing it.

  • Page 103: Seat Adjustment

    Function description and operating tips seat adjustment seat sliding seat height adjustment note • w h e n y o u l e f t t h e s e a t , t h e buzzer will sound for 10 seconds (repeated sound) if the parking brake is not applied.

  • Page 104: Position Control Lever

    • your body as low as possible, not your waist or abdomen. otherwise, the seat belt cannot protect you properly. 1 1 1 d21o420a (1) seat belt...

  • Page 105: Draft Control Lever

    Function description and operating tips draFt control lever liFting arm (lower linK) speed control Knob the position control lever is used to manual adjust the height of implements on the 3-point hitch ends. the implement attached to the lifting arm can be lowered by pushing the lever while the implement is raised by pulling the lever.

  • Page 106: Double Acting Lever

    (optional) caution in abnormal driving condition, such as rapid acceleration or deceleration, is occurred by operating the hst pedal, not by 1 1 1 other functions such as the load match, speed synchronization and cruise control, follow the following steps immediately.

  • Page 107: Front W Heel Drive Lever

    Function description and operating tips Front w heel drive lever external liFt lever the 4wd function can be used un- rops der the following conditions: be sure to full stop the tractor before engaging or disengaging the 4wd. 1 1 1 caution to avoid accidents: •...

  • Page 108: Cabin System

    (1) heater/air conditioner switch (2) room lamp (3) vent (4) air inlet (5) speaker 1 1 1 d21o425a TD210-EEC인증용-DK6010H,DK6010C,DK642 42 2018-11-28 오후 1:51:53...

  • Page 109: Exterior Devices

    Function description and operating tips exterior devices 3. the cabin can be kept comfortable and pleasant by operating the air conditioner and heater. 4. the cabin structure is safe as it is verified by the rops (roll over protection structure) test. how- ever, make sure to fasten the seat belt for the best protection.

  • Page 110: Entrance

    M55o4s4a (1) door handle (1) door lever pull the handle forward to open the enter or leave the tractor through the to open the door in the cabin, push door. left-hand door. the lever outwards.

  • Page 111: Rear Window

    Function description and operating tips rear window worKing light warning the rear window may not be • opened due to an implement. make sure there is enough space to open the window to prevent damage and breakage by an implement. •...

  • Page 112: Bluetooth Player (Option)

    (option) caution important • normal water can be used as • working with the volume of the washer fluid, but it is recom- the stereo system excessively mended to use the washer fluid high can affect the driver's made exclusively for vehicles.

  • Page 113: Antenna

    Function description and operating tips antenna indoor lamp cup holder and storage 1 1 1 d21o429a te1o465a 1 1 1 (1) antenna (1) indoor lamp check the contact and angle of the if you press the lens, the indoor antenna in case of poor signal recep- lamp will be turned on.

  • Page 114: Sun Visor(If Equipped)

    Fresh air mode it is possible to recirculate internal air or draw fresh air by operating the air conditioner. 1 1 1 it is not possible to block outside air from coming in, even in the recircula- tion mode.

  • Page 115: Location And Method Of Opening Of Emer- Gency Exits

    Function description and operating tips location and method oF open- ing oF emergency exits td2o488a (1) handle of rear window in emergency, open the rear window and escape from the cabin. TD210-EEC인증용-DK6010H,DK6010C,DK649 49 2018-11-28 오후 1:52:02...

  • Page 116: Heater And Air Conditioner

    • mal conditions and use the air recirculation mode only if necessary. continued opera- tion of the air recirculation mode can cause the inside to become stuffy, causing head- aches, drowsiness, or frost on the windows.
  • Page 117 Function description and operating tips Fan speed control dial air conditioner switch vent mode control dial h11o493a t21o432a t21o442a the fan speed for the heater and air press it to activate the air conditioner Air flows out from four left and right conditioner can be adjusted in four and press it again to deactivate the vents toward the driver when turning...
  • Page 118 Air flows out from four front and four Air flows out from four front vents to- the desired temperature can be set left and right vents when turning the ward the driver when turning the vent by adjusting this dial.
  • Page 119 Function description and operating tips air conditioner maintenance warning caution Make sure to follow the instructions if you sleep with the air con- • • K e e p t h e w i n d o w s c l o s e d below to keep the air conditioner in ditioner or heater in opera- while the a/c is in operation...

  • Page 120: 7-Pin Socket (Optional)

    Kioti dealer tion lamps of the trailer. if malfunction is found. TD210-EEC인증용-DK6010H,DK6010C,DK654 54 2018-11-28 오후 1:52:08...

  • Page 121: Tires

    Consult your local inflating tires. Kioti dealer for this issue. TD210-EEC인증용-DK6010H,DK6010C,DK655 55 2018-11-28 오후 1:52:09...

  • Page 122: Inflation Pressure

    260/70r16 240 kpa (2,44 kgf/cm², 34,7 psi) table are installed, contact the 280/70r16 240 kpa (2,44 kgf/cm², 34,7 psi) Kioti dealer for the front/rear 305/70r16,5 400 kpa (4,07 kgf/cm², 57,8 psi) wheel speed ratio. improper front/rear wheel speed ratio can 12,4-24, 6pr 157 kpa (1,6 kg/cm², 22 psi)

  • Page 123: Tread

    Function description and operating tips tread td2o457a (1) bolt (2) rim bolt (3) rim (4) disc t46w031a When working on a field where c are linearly aligned, the tread should be ad- warning justed so that the tires do not cross over the c. also, it is necessary to increase the tread to prevent any accident when working on a slope or trailing.

  • Page 124: Wheel Torque And Direction

    Front tread can not be adjusted. if it in. (mm) is necessary to adjust it, contact your 13.6 - 24 (agricultural) local Kioti dealer. if it is damaged by unapproved modi- < Standard > fication, it will not be covered by war- ranty.
  • Page 125 144,6~166,3 lbf-ft 20 ~ 23 kgf·m 20 ~ 23 kgf·m warning warning d21o449a use tires approved by Kioti use tires approved by Kioti only. • • (1) wheel bolt (nut) (2) rim bolt only. assemble the tire as shown in •...

  • Page 126: Additional Weight (Option)

    Kioti dealer. For required number if sufficient weight, such as front of weights, consult your local Kioti loader, is applied to the front wheels, dealer. remove the extra front weight.
  • Page 127 For detailed information on installa- important the traction of the tractor by increas- tion, contact your local Kioti dealer. • attach only required amount ing the grip of the rear wheels when of weight.
  • Page 128 • attach only required amount of weight. • unnecessary weight can result in poor braking performance, rapid wear of the brake discs, shortened axle life, and in- crease in fuel consumption. TD210-EEC인증용-DK6010H,DK6010C,DK662 62 2018-11-28 오후 1:52:13...

  • Page 129: Operation

    OPERATION PRE-OPERATION CHECK ........... 5-2 INITIAl OPERATION ............ 5-2 OPERATING THE ENGINE .......... 5-3 STARTING THE ENGINE ............5-3 SToppING THE ENGINE ............5-6 WARMING Up ................5-7 JUMp STARTING ................5-8 OPERATING THE TRACTOR ........5-9 HoW To dRIvE ................5-9 HoW To Fold THE RopS ............5-13 HoW To RAISE THE RopS To UpRIGHT poSITIoN ....5-15 pARkING ...................5-16 TURNING ..................5-17...

  • Page 130: Pre-Operation Check

    PRE-OPERATION CHECK INITIAl OPERATION CHECK ITEmS It is a good practice to know the con- • Walk around inspection. driving a new tractor at a high speed dition of your tractor before you start or under heavy load can affect its du- •...

  • Page 131: Operating The Engine

    opERATIoN OPERATING THE ENGINE STARTING THE ENGINE WARNING NOTE To avoid accidents: 1 1 1 • When the parking brake is en- gaged, the parking brake lamp be sure to read and under- • on the instrument cluster illu- stand the warning and cau- minates.
  • Page 132 1 1 1 d21o503A td2O441a (1) position control lever (1) clutch pedal (A) “doWN” 5. lower the attachment by pushing 6. Set the hand throttle lever to the Td2o501A the position control lever forward. “Slow” position. (In case of cold...
  • Page 133 opERATIoN It is normal that the charge warn- ing lamp and engine oil pressure warning lamps come on when the key is in “oN” position before the engine starts. WARNING Never operate the start motor • for more than 10 consecu- tive seconds as it consumes td2O501e d21o444A...

  • Page 134: Stopping The Engine

    ON, the check the engine oil level. If the battery can be discharged and engine oil level is proper, contact the tractor’s electrical system your local KIOTI dealer. can be damaged. WARNING • The engine can be severely...

  • Page 135: Warming Up

    5. The engine is sufficiently warmed unattended. It can be stolen, as up when the temperature gauge on the key used for all KIOTI trac- the instrument panel indicates 1/4 tors are the same in design. of the normal temperature range, •...

  • Page 136: Jump Starting

    JUmP STARTING HOW TO WARm UP ENGINE (fOR HyDRAUlIC SHUTTlE TRACTOR) WARNING 1. After starting the engine with the Warming up the engine ex- • clutch depressed, make sure that cessively increases fuel con- the shuttle lever is in its neutral po-...

  • Page 137: Operating The Tractor

    opERATIoN OPERATING THE TRACTOR HOW TO DRIvE 2. check the length of the jump cable 8. disconnect the black cable from and position another tractor near the negative battery terminals of the tractor with the discharged bat- both of the tractors. tery.
  • Page 138 WARNING Do not wear the seat belt if • the ROPS is not installed or folded down. Td2o507A H11o511A (1) Seat belt (1) brake pedals (lH/RH) (2) brake pedal Interlock latch (A) depress 2. Wear the seat belt.
  • Page 139 opERATIoN 3. Make sure that both brake pedals are interlocked. WARNING 1 1 1 If depressing only one brake 1 1 1 • pedal at a high speed, the tractor can lose its balance and be overturned. d21o507A d21o508A (1) position control lever (1) Hand Throttle lever (A) “Up”...
  • Page 140 6. depress the brake pedal to release mANUAl mANUAl the parking brake. Td2o509b Td2o510A (1) parking brake (2) brake pedal (1) clutch pedal (A) depress (A) depress 7. depress the clutch pedal fully. CAUTION 1 1 1 To avoid accidents: •...

  • Page 141: How To Fold The Rops

    opERATIoN HOW TO fOlD THE ROPS mANUAl CAUTION • Never put your foot on the clutch pedal during driving. The clutch disc can be rapidly worn. • m a k e s u r e t o o p e r a t e t h e clutch fast when disengaging it and slowly when engaging it.
  • Page 142 CAUTION CAUTION • It is very dangerous to drive To avoid accidents: with the ROPS folded. fold the • fix the mounting bolts firmly ROPS only when there is abso- and secure the frame with the lutely no possibility for roll over.

  • Page 143: How To Raise The Rops To Upright Position

    opERATIoN HOW TO RAISE THE ROPS TO UPRIGHT POSITION CAUTION To avoid accidents: • make sure to set the ROPS up- right and fasten the seat belt during work. If it is necessary to work with ROPS folded, do not fasten the seat belt. fas- tening seat belt with folded ROPS can be dangerous in td2O514a...

  • Page 144: Parking

    PARKING 1. pull the parking brake lever (2) up WARNING with the brake pedals depressed fully to engage the pedals with the latch. The brake pad can be rapidly • If the braking force is insufficient, de- worn if you drive with the park- ing brake applied.

  • Page 145: Turning

    opERATIoN TURNING DRIvING ON SlOPE you should turn slowly by reducing ve- 1. please drive according to the con- ImPORTANT hicle speed. ditions of the slope at safe speed so that the engine is not under • The tractor may move slowly WARNING heavy load if possible.

  • Page 146: Precautions When Coming In And Out Of Work Field

    PRECAUTIONS WHEN COmING PRECAUTIONS WHIlE DRIvING IN AND OUT Of WORK fIElD ON THE ROAD ImPORTANT • for a heavy load job, such as front end loader operation, use low speed of the range shift lever. T85o536A 1. Make sure that the left and right pedal are interlocked.
  • Page 147 opERATIoN 2. do not use high beam headlights mANUAl WARNING when another vehicle is approach- ing from the opposite direction so make sure to connect the left • that not to interrupt another driver’ and right pedals firmly before driving on a road. If they are s view.

  • Page 148: Loading Into And Unloading Out Of The Truck

    INTO AND UNlOADING OUT Of THE TRUCK PRECAUTIONS WHEN USING POWER STEERING WARNING When transporting the trac- • tor with a truck, fix the trac- tor firmly onto the truck and be aware of the height of the...
  • Page 149 Therefore, the angle safety valve (Relief valve) can be • If a malfunction occurs while of the KIOTI emblem on the cen- heard. do not operate the tractor if driving on a road, stop the ter of the steering wheel may differ...

  • Page 150: 3-Point Hitch Control Position Control

    3-POINT HITCH CONTROl PO- SITION CONTROl WARNING WARNING The center of gravity of the If stopping the engine while • • tractor is higher compared driving, the steering perfor- 1 1 1 to other common vehicles, mance can become deterio-...
  • Page 151 opERATIoN 1 1 1 d21O517a d21O518a td2O521a (1) lower link (1) lowering Speed control lever (1) position control lever (A) High speed (b) low speed (2) lock bolt 4. The lower link is lifted by the hy- 6. The lowering speed of the lower 7.
  • Page 152 DRAfT CONTROl (If APPlICAblE) WARNING If trying to lift an object with • excessive weight by the 3-point hitch while the tractor is not equipped with proper front suit case weights, the front wheels may be lifted instead, leading to roll over.
  • Page 153 KIOTI Dealer. temporarily. In this case, let the lever with the lock bolt. engine idle for 3 to 4 minutes.

  • Page 154: Remote Hydraulics Double Acting Lever (If Equipped)

    1 / 2 Additionally, you can attach one more double acting valve please This machine is equipped with one contact KIOTI dealer. double-acting valves (detent type) which can supply hydraulic pressure to exterior devices. Utilize them prop- erly according to implement specifi- cations.
  • Page 155 opERATIoN PT1/2 COUPlER SOCKET CONNECTING AND DISCONNECTING ImPlEmENT (ImPlEmENT) CONNECTION ImPORTANT 1. Make sure to stop the engine be- • Put the detent valve operating fore connecting it. lever into the neutral position 2. Move the double acting valve le- when the hydraulic implement ver forward and backward for 4 is not in use.
  • Page 156 DISCONNECTION WARNING 1. Make sure to stop the engine be- Never connect or disconnect • fore disconnecting it. the implement hydraulic hoses 2. Release any residual pressure in the while the pressure in it is not re- hydraulic hoses of the implement leased or the engine is running.

  • Page 157: 3-Point Hitch Implement And Loader Operation

    3-POINT HITCH IMPLEMENT AND LOADER OPERATION REMOvAL AND INsTALLATION Of 3-POINT HITCH IMPLEMENT (INCLuDINg CONNECTION Of uNIvERsAL jOINT) ..........6-2 OPERATION fOR 3-POINT HITCH IMPLEMENT MOuNTINg COMPONENTs ........6-4 Adjustment of lift rod .............6-5 Adjustment of top link .............6-5 Adjustment of check link ..........6-5 dismounting the implement ..........6-6 drAwbAr And trAiler ............6-6 pto &...

  • Page 158: Removal And Installation Of 3-Point Hitch Implement (Including Connection Of Universal Joint)

    REMOvAL AND INsTALLATION Of 3-POINT HITCH IMPLEMENT (INCLuDINg CONNECTION Of uNIvERsAL jOINT) 1 1 1 H61O608b d21o601A H61O615A (1) implement support (2) implement pin (1) check link (2) turn buckle (1) turn buckle (2) lift rod (rh) (3) lower link...
  • Page 159 3-point hitch implement And loAder operAtion 10. Adjust the balance of implement by adjusting the length of lift rod (rh). tighten the turn buckle lock nut of lift rod (rh) securely afterward. H61O608A H61O616A-2 (1) top link (2) top link bracket (1) implement support (3) snap pin (4) top link hook...

  • Page 160: Operation For 3-Point Hitch Implement Mounting Components

    OPERATION fOR 3-POINT HITCH IMPLEMENT MOuNTINg COMPONENTs (1) top link (2) lift rod (l) (3) lift rod (r) 1 1 1 (4) check chain (5) lower link (6) drawbar d21o604A TD210-EEC인증용-DK6010H,DK6010C,DK64 4 2018-04-20 오후 1:28:11...

  • Page 161: Adjustment Of Lift Rod

    3-point hitch implement And loAder operAtion ADjusTMENT Of LIfT ROD ADjusTMENT Of TOP LINk ADjusTMENT Of CHECk LINk 1 1 1 1 1 1 d21o602A d21o603A d21o605A (1) lift rod (2) turn buckle (1) top link (2) set pin (1) check chain (2) turn buckle (3) lock nut (3) lynch pin...

  • Page 162: Dismounting The Implement

    DIsMOuNTINg THE IMPLEMENT DRAwbAR AND TRAILER 1. park the tractor with the implement TYPE 1 (standard for Eu market) TYPE 3 on the level ground and lower the implement all the way down. install the implement support as needed.
  • Page 163 3-point hitch implement And loAder operAtion the draw bar is used to pull an im- TYPE 4 TYPE 2 (T5718-5503) plement, such as a trailer. AREA THE OTHER COuNTRY AREA make sure to check the max. towing clevis type (non automatic weight of the trailer and max.
  • Page 164 Never use any other part for • pulling except draw bar. Pull- ing with top link, ROPs and etc. will cause a fatal accident. be sure to install the auxiliary • safety chain when installing a trailer. Improper use of the draw-bar, •...

  • Page 165: Pto & Pto Shield Guard

    3-point hitch implement And loAder operAtion PTO & PTO sHIELD guARD HYDRAuLIC bRAkE vALvE (If EQuIPPED) before you install the some kind of implement, take off pto shaft cap(2) and install the universal joint of im- plement. if necessary, fold up the pto shield guard (1).
  • Page 166 Trailer brake Coupling please check if the brake brand and Never exceed a speed of 25km/ • brand sAfim types of the trailer are suitable with h (15 mph) when travelling with as below.

  • Page 167: Installing Pto Shaft

    (1) lock pin when using the PTO drive • with a stationary tractor, al- 1. consult your local kIOTI dealer for ways make sure that the gears selection of the universal joint. are in neutral and that the parking brake is applied.
  • Page 168 PTO- • driven implement hitched to the three-point linkage, lift the implement to its full height and check that at least 1/4 of the total length of the tele- scopic section of the drive shaft is engaged.

  • Page 169: Handling Loader

    3-point hitch implement And loAder operAtion HANDLINg LOADER (1) loader mounting bracket (2) balancing cylinder (3) loader Arm (4) boom (5) grill guard (6) tilt cylinder (7) bucket for detailed information about installa- tion and use of the front loader, refer to the separate manual of the loader.
  • Page 170 POINTs fOR fRONT END LOADER ※ both of left and right side is same. [front axle frame] [flywheel housing] [rear axle & transmission] d21o611A wARNINg • when you do install the front loader, certainly mount the bolt for mounting bracket at indicated point.

  • Page 171: Driving On Slope

    3-point hitch implement And loAder operAtion DRIvINg ON sLOPE wHEN LOADED buCkET AND REAR wHEN uNLOADED buCkET AND REAR bALLAsT ARE INsTALLED bALLAsT ARE INsTALLED when driving downhill with the empty DRIvINg ON uPHILL DRIvINg ON uPHILL bucket and rear ballast installed, keep the rear ballast toward the higher level of the ground.

  • Page 172: Joystick Lever(If Equipped)

    LEvER(If EQuIPPED) PARkINg wITH LOADER INsTALLED 1 1 1 1 1 1 d21o606A d21o607A M55O625A (1) joystick lever (1) joystick lever (A) boom down (b) boom up 1. up and down of boom CAuTION floAt pulling the joystick lever back (b) •...
  • Page 173 3-point hitch implement And loAder operAtion one position further to forward 5. down & roll back from the down position. when the the boom can be lowered and the lever is in this position, the boom bucket can be rolled back at same moves up and down freely along time by operating the joystick lever the surface of the ground as the...
  • Page 174 7. up & roll back 9. locking / unlocking joystick wARNINg the boom can be lifted and the Do not leave the tractor with  bucket can scoop up at same time the boom off the ground in any by operating the joystick lever to circumstances.

  • Page 175: Joystick Valve Port

    • for detail about implement instal- down lation method, refer to kIOTI front loader owner’s manual. boom boom down TD210-EEC인증용-DK6010H,DK6010C,DK619 19 2018-04-20 오후 1:28:30...
  • Page 176 Never let anyone get in the when attaching or detach- • • loader and use the loader as a ing the loader, fix all parts workbench. Otherwise, it may which are connected to the lead to injury or even death.
  • Page 177 MAINTENANCE MAINTENANCE ChECk lIsT .... 7-3 changing engine oil anD rePlac- ing filter (l) ........7-16 Daily check item ........7-3 rePlacing transmission fluiD maintenance scheDule chart ..7-4 anD filter (m) ........7-18 lUBRICANTs ........7-8 changing front axle case oil (n).. 7-19 aDJusting Brake PeDal (o) ....
  • Page 178 MAINTENANCE aDJusting front axle Pivot Pin (aD) ...7-30 aDJusting engine valve clear- ance (ae) ..........7-30 rePlacing air cleaner filter (af) . 7-31 check anD clean caB air intake filter ............ 7-31 flush cooling system anD chang- ing coolant (aJ) ....... 7-34 anti-freeze ..........

  • Page 179: Maintenance Check List

    maintenance MAINTENANCE ChECk lIsT DAIly ChECk ITEM sERVICE sChEDUlE Maintenance codes Item sERVICE REQUIRED engine oil Check the oil level and add as needed. Do not overfill. hydraulic (transmission/ check level and add as needed. front axle) oil level Air cleaner and its filter Check the filter condition for leakage and damage.

  • Page 180: Maintenance Schedule Chart

    Dk6010 MAINTENANCE sChEDUlE ChART Maintenance Run hour Run Age Mainte- Interval Remarks nance 50 100 200 250 400 600 800 1500 3000 1 year 2 year codes Item Di / iDi ⊙ ○ ○ change tier2 or 3 ○ ○...
  • Page 181 maintenance Maintenance Run hour Run Age Mainte- Interval Remarks nance 50 100 200 250 400 600 800 1500 3000 1 year 2 year codes Item check ⊙ 11 air cleaner element clean t, af ○ replace ○ ○ 12 Fuel filter element replace ○...
  • Page 182 Dk6010 Maintenance Run hour Run Age Mainte- Interval Remarks nance 50 100 200 250 400 600 800 1500 3000 1 year 2 year codes Item 21 toe-in adjust ○ 22 engine valve clearance adjust ○ fuel injection nozzle injection pres- check ○...
  • Page 183 ＊ • The items listed above (# marked) are registered as emission related critical parts by kIOTI in U.s. EPA ex- haust emission standard non-road emission regulation. As the engine owner, you are responsible for the performance of the required maintenance on the above instruction.

  • Page 184: Lubricants

    Dk6010 lUBRICANTs to prevent serious damage to the equipment, use only genuine kIOTI fluids, oils and greases or equivalents. Item l (U.s.gal.) lubricants fuel 48 (12,7)(*) / 45 (11,9)(**) ultra-low sulfur diesel (sulfur content: 10 ppm or less) coolant 7,9 (2,1)
  • Page 185 maintenance WARNING Check the oil level periodically. Correct the oil level, if needed, before operating. • Always check and add oil with the tractor on a flat, level surface. • Do not deliberate tampering with or misuse of the engine emissions control system; in particular with re- •...

  • Page 186: Maintenance Code

    Dk6010 MAINTENANCE CODE hOW TO DIsCONNECT ThE hOOD (A) 1 1 1 CAUTION 1 1 1 • Be careful not to trap your fingers when closing the side cover. • Never open the side covers while the engine is running.

  • Page 187: Checking And Adding Fuel (C)

    maintenance ChECkING AND ADDING FUEl (C) 1. turn the key switch to "on", check IMPORTANT the amount of fuel by fuel gauge. • Be careful not to let the fuel 2. if the needle on the fuel gauge is 1 1 1 tank become empty.

  • Page 188: Checking Transmission Fluid Level (D)

    Dk6010 ChECkING TRANsMIssION FlUID lEVEl (D) IMPORTANT • If oil level is low, do not run engine. • Never add the oil over the up- per limit. • Be sure to check the oil level after installing hydraulic imple- ment. Add the fluid as needed.

  • Page 189: Checking Engine Oil Level (E)

    maintenance ChECkING ENGINE OIl lEVEl (E) IMPORTANT • When using oil of different maker or viscosity from the previous one, remove all of the old oil. Never mix two dif- 1 1 1 ferent types of oil. • Do not start the engine when the oil level is below lower limit.

  • Page 190: Checking Coolant Level (F)

    Dk6010 ChECkING COOlANT lEVEl (F) ClEANING GRIll, RADIATOR sCREEN (G) 3. the tractor is furnished in the fac- tory with a mixture of anti-freeze (ethylene glycol) and water in a ra- tio of 50:50 which is usable in any season.

  • Page 191: Checking Brake And Clutch Pedals (H)

    maintenance ChECkING BRAkE AND ClUTCh ChECkING GAUGEs, METER PEDAls (h) AND INDICATORs (I) 1. t h e b r a k e a n d c l u t c h p e d a l s 1. inspect the instrument panel for IMPORTANT should be inspected for free travel, broken gauge(s), meter(s) and in-...

  • Page 192: Changing Engine Oil And Replacing Filter (L)

    Dk6010 ChANGING ENGINE OIl AND REPlACING FIlTER (l) td2O706A td2O710A td2O711A (1) oil filler hole (2) oil Dipstick (1) Drain Plug (1) engine oil filter (a) oil level is acceptable within this range 1. Park the tractor on a level ground 2.
  • Page 193 IMPORTANT • Use only specified engine oil and kIOTI genuine filter to insure smooth operation and durability of the engine. TD210-EEC인증용-DK6010H,DK6010C,DK617 17 2018-12-27 오전 10:30:35...

  • Page 194: Replacing Transmission Fluid And Filter (M)

    Dk6010 REPlACING TRANsMIssION FlUID AND FIlTER (M) 4. unscrew the fluid filter from the rear right section on the tractor us- ing a filter wrench. 1 1 1 1 1 1 td2O712A D21o706a (1) hydraulic filter (1) Drain Plug If transmission fluid is contaminated 3.

  • Page 195: Changing Front Axle Case Oil (N)

    (lh/rh) and front the hydraulic system, use only axle support to drain oil. 6. Tighten the filter until it touches the a KIOTI genuine filter. mounting surface. then, tighten 2. after draining, reinstall the drain • Do not operate the tractor the filter for a half turn further with plugs securely.

  • Page 196: Adjusting Brake Pedal (O)

    Dk6010 ADJUsTING BRAkE PEDAl (O) 3. when adjustments are needed, loosen the locking nut and turn the turn buckle until the rod length is at the desired and acceptable limit. 4. after adjustment, tighten the lock- ing nut firmly. 5. repeat the same procedure for the left brake pedal and measure its free play.

  • Page 197: Lubricating Grease Nipple (P)

    maintenance lUBRICATING GREAsE NIPPlE (P) Apply quality multi-purpose grease to the locations specified in the following figure at every 50 hours of use or when necessary. also, record the operating hour on every application. td2O716A h61O753A td2O717A (1) front Bracket (axle Pivot) (1) throttle Pedal (1) Bevel gear case (lh/rh) (2) rear Bracket (axle Pivot)

  • Page 198: Checking Wheel Bolt/Nut Torque (Q)

    Dk6010 ChECkING WhEEl BOlT/NUT TORQUE (Q) ADJUsTING ClUTCh PEDAl (R) MANUAl CAUTION To avoid injury: • Never operate tractor with a loose rim, wheel, or axle. • Any time bolts and nuts are loosened, retighten to speci- fied torque. 1 1 1 •...

  • Page 199: Fuel Filter (S)

    maintenance FUEl FIlTER (s) ClEANING AND REPlACING AIR ClEANER FIlTER (T) REMOVING WATER FROM FUEl FIlTER 1 1 1 1. water and dust in fuel are accumu- lated in the filter. Remove the plug from the bottom of the fuel filter to drain any impurities.

  • Page 200: Checking Fuel Lines (U)

    Dk6010 ChECkING FUEl lINEs (U) 4. For filter replacement, refer to the IMPORTANT instruction for replacing the air • Be sure to refit the cover with cleaner filter for every year. the arrow (on the rear of To clean the filter, use only clean dry cover) upright.

  • Page 201: Adjusting Fan Belt Tension (V)

    maintenance ADJUsTING FAN BElT TENsION (V) 3. if the fuel pipes and hose clamps IMPORTANT are found damaged or deterio- • When disconnecting the fuel rated earlier than two years, then pipe for replacement, plug change them immediately. both ends with cloth or paper 4.

  • Page 202: Battery (W)

    Dk6010 BATTERy (W) PRECAUTIONs FOR hANDlING 3. apply grease to the terminals and Belt deflection for cable end in order to prevent cor- proper fan belt tension (A) rosion. A deflection of between 7 ~ 9 mm (0,27 ~ 0,35 in.) WARNING 4.
  • Page 203 2. Boost charging is only for emer- cal kIOTI Dealer. gencies. it will partially charge the • keep the battery fully charged. battery at a high rate and in a short If the battery fluid concentration time.

  • Page 204: Checking Intake Air Line (X)

    Dk6010 ChECkING INTAkE AIR lINE (x) ADJUsTING TOE-IN (y) DIRECTION FOR sTORAGE ADJUsTING PROCEDURE 1. when storing the tractor for a long period, remove the battery from tractor and store in a dry place out of direct sunlight. 1 1 1 2.

  • Page 205: Checking Radiator Hose And Clamp (Z)

    maintenance ChECkING RADIATOR hOsE AND ClAMP (z) 6. front distance should be 2 ~ 8 mm take the following actions in the (0,079 ~ 0,315 in.) less than rear event the coolant temperature reach- distance. if not, adjust the length es the boiling point, what is called of the tie rod joint.

  • Page 206: Power Steering Line (Aa)

    ClEARANCE (AE) improper adjustment of the valve clear- ance can reduce the performance and / or damage the engine. this ad- justment should only be preformed by a certified kIOTI dealer. td2O730A td2O729A (1) Power steering oil line (1) adjusting screw (2) lock nut 1.

  • Page 207: Replacing Air Cleaner Filter (Af)

    • Use only a KIOTI genuine fil- can be hazardous to operators be shortened, excessive soot can be ter. If using a product other and others in the area.
  • Page 208 Dk6010 CAUTION IMPORTANT IMPORTANT Always wear protective clothing, • The Manufacturer has no re- • Dispose of filters correctly in e.g.: overalls, goggles, gloves sponsibility whatever, either accordance with local regula- and face mask when preparing direct or indirect, for applica- tions.
  • Page 209 maintenance WARNING CAUTION Ta k e t h e f i l t e r o f f b e f o r e • • Only install carbon filters sup- washing the cab. If the cab is plied sealed when delivered: washed and the filter has not comply with the operating been demounted, take care to...

  • Page 210: Flush Cooling System And Changing Coolant (Aj)

    Dk6010 FlUsh COOlING sysTEM AND ChANGING COOlANT (AJ) 11. check the coolant level in the reservoir tank. if the level is low, add coolant. Coolant capacity [l (U.s. gal)] 7,9 (2,1) CAUTION To avoid accidents: • Do not remove the radiator cap...

  • Page 211: Anti-Freeze

    (anti-freeze contains an anti- • If the coolant leaks, contact corrosive agent, which will react your local kIOTI Dealer. with the radiator cleaning agent forming sludge which will affect the engine parts) TD210-EEC인증용-DK6010H,DK6010C,DK635 35...

  • Page 212: Bleeding Fuel System (Ak)

    Dk6010 BlEEDING FUEl sysTEM (Ak) 1. make sure that the amount of fuel Standard IMPORTANT in the fuel tank is sufficient. To protect the catalyst filter, 2. if air is introduced into the fuel keep the followings: filter, unscrew the bleeding bolt •...

  • Page 213: Checking And Replacing Wiper(Am)

    maintenance ChECkING AND REPlACING WIPER(AM) INsPECTION REPlACEMENT CAUTION • Never bleed the fuel system while the engine is hot. IMPORTANT • After bleeding, fuel without air bubbles is filtered by the fuel filter and is transferred to the fuel injection pump. t21o460a h11o649a Maintain the proper fuel level...
  • Page 214 Dk6010 h11o651a h11o652a h11o650a (1) wiper arm (2) fixing lever (1) wiper Blade 4. set a new wiper blade horizontal 3. lower the blade and pull out the 5. lift the wiper blade to its end and so that the fixing lever is facing...

  • Page 215: Draining Water From Clutch Housing (Al)

    maintenance DRAINING WATER FROM ClUTCh BODy FUsE (AN) hOUsING (Al) CAUTION • When wiping the windshield, set the wiper blade upright, spray water onto the glass w i t h a h o s e , a n d w i p e t h e glass with clean cloth.
  • Page 216 Dk6010 Dk6010h One Side Brake Head Lamp Stop Lamp Flasher Stop Combimeter Spare20A Horn Lamp ECU(On) tc2o735a Working ECU(B+) 20A Spare15A Lamp(option) Alternator Combimeter Head/Tail 3rd function ECU(Relay) Lamp valve(Option) Spare10A Safety unit (Sensor) Beacon(Option) Cruise magnet the fuse panel is located in the right...
  • Page 217 maintenance Dk6010ch One Side Brake Head Lamp Stop Lamp Flasher Stop Combimeter Start Horn Lamp ECU(On) tG1O769A Stereo Backup 3rd function ECU(B+) 20A Room lamp valve(Option) Alternator (1) normal fuse Head/Tail Combimeter Safety unit Lamp Beacon(Option) ECU(Relay) Spare Rear Glass Working (Sensor) Defogger...
  • Page 218 Dk6010 there are marks for the fuse capac- Dk6010c ity and location on the cover of the fuse panel. replace the fuse accord- One Side ing to the following procedure: Brake 1. turn the key switch to the “off” Head Lamp position and turn off all the electri- cal devices.

  • Page 219: Slow-Blow Fuse (Ap)

    Dealer. • Refer to the chapter “Trouble- • if the fusible link, relay or other shooting”...

  • Page 220: Replacing Bulb (Aq)

    Dk6010 REPlACING BUlB (AQ) hEADlAMP the bulbs and their capacity used 1 1 1 in this tractor are listed in the below table. this section only describes procedures the users can handle. sequence Bulb Capacity headlamp 35w/35w Position lamp (front)
  • Page 221 Make sure to use bulbs with • the specified capacity. CAUTION D21o715a • Make sure to use a kIOTI genu- (1) turn signal lamp ine bulb. Using a non-recom- mended bulb can cause a fire. • The headlamps can temporar- 1.
  • Page 222 Dk6010 FRONT TURN sIGNAl lAMP AND POsITION lAMP td2O742A td2O744A (1) screw (2) cover (1) screw (2) lens 3. loosen the screw to remove the cover. 1. the front turn signal lamps are in- stalled onto the ROPs frame. 2. loosen the screw to remove the lens.
  • Page 223 maintenance td2O745A (1) turn signal lamp Bulb (2) Position lamp Bulb 3. remove the bulb by turning its socket counterclockwise. install a new bulb. TD210-EEC인증용-DK6010H,DK6010C,DK647 47 2018-12-27 오전 10:30:59...
  • Page 224 MEMO MEMO TD210-EEC인증용-DK6010H,DK6010C,DK648 48 2018-12-27 오전 10:30:59...

  • Page 225: Storage And Disposal

    STORAGE AND DISPOSAL TRAcTOR STORAGE ..........8-2 Daily storage ................8-2 long-term storage .............8-2 Using traCtor aFter longterm storage ....8-4 USAGE AND DISPOSAL ..........8-4 TD210-EEC인증용-DK6010H,DK6010C,DK61 1 2018-04-20 오후 1:30:22...

  • Page 226: Tractor Storage

    DK6010 TRAcTOR STORAGE DAILy STORAGE LONG-TERm STORAGE 1. Keep the tractor clean when it is if the tractor will be kept unused for 5. C h a n g e t h e e n g i n e o i l a n d stored.
  • Page 227 storage anD DisPosal 10. Clean the engine components as cAUTION well as the tractor. To avoid injury: 11. Add grease to all the grease fit- • Never clean the tractor body ting. while the engine is running. 12. Flush the cooling system and •...

  • Page 228: Using Tractor After Longterm Storage

    5. remove grease from the exposed er condition. adjust the free play your local KIOTI Dealer to dispose cylinder rod. of the brake pedal if necessary. it according to the regulations.

  • Page 229: Troubleshooting

    TROUBLESHOOTING ENGINE TROUBLESHOOTING ........9-2 TRacTOR TROUBLESHOOTING ....... 9-4 TD210-EEC인증용-DK6010H,DK6010C,DK61 1 2018-04-20 오후 1:30:39...

  • Page 230: Engine Troubleshooting

    DK6010 This troubleshooting chart summarizes simple service items for users who are familiar with mechanical systems. For more detailed service items, contact your local KIOTI Dealer. ENGINE TROUBLESHOOTING cause countermeasures 1. When engine is difficult to start • Fuel is thick and doesn’t flow.
  • Page 231 Temp. Fuel type Over -10°C NO. 2 diesel Below -10°C NO. 1 diesel • Nozzle is bad • If necessary, replace with new nozzle. ※ If you have any question, contact your KIOTI Dealer. TD210-EEC인증용-DK6010H,DK6010C,DK63 3 2018-04-20 오후 1:30:39...

  • Page 232: Tractor Troubleshooting

    • Release the parking brake. 2. Clutch is not operating • Clutch slips (Idles) • Check and adjust the clutch pedal play. Contact your KIOTI dealer. properly • Faulty clutch pedal position sensor. Contact your KIOTI dealer. • Worn hydraulic clutch. Contact your KIOTI dealer.
  • Page 233 • There is air in the intake pipe. Bleed the pipe. • The oil filter is clogged. Clean or replace it. • The hydraulic filter, valve and cylinder are malfunctioning. Have them repaired at your KIOTI dealer. • 3-point hitch vibrates by itself • Defective sensor. Contact your KIOTI dealer.
  • Page 234 • Work lamps do not come on • The bulb is blown. Replace it. • The ground and terminal wirings are poorly contacted. Check and clean them. ※ If you have any question, contact your KIOTI Dealer. TD210-EEC인증용-DK6010H,DK6010C,DK66 6 2018-04-20 오후 1:30:39...

  • Page 235: Index

    INDEX INDEX................10-2 TD210-EEC인증용-DK6010H,DK6010C,DK61 1 2018-12-26 오전 10:50:39...
  • Page 236 DK6010 NUMERIC Anti-frEEzE ..............7-35 3-point hitch control position control ..5-22 3-point hitch iMplEMEnt AnD loADEr opErAtion 6-1 4WD inDicAtor (if EquippED) ........4-21 BAttErY (W) ..............7-26 7-pin socKEt (optionAl) ..........4-54 BAttErY chArging lAMp ..........4-19 BAttErY sWitch ............7-27 BElts AnD ruBBEr pArts ..........2-5 ADDitionAl front WEight .........4-60...
  • Page 237 inDEx chEcKing BrAKE AnD clutch pEDAls (h) ....7-15 chEcKing coolAnt lEVEl (f)........7-14 DAilY chEcK itEM ............7-3 chEcKing EnginE oil lEVEl (E) .........7-13 DAilY storAgE ..............8-2 chEcKing fuEl linEs (u) ..........7-24 DEcAl Mounting locAtion ........1-27 chEcKing gAugEs, MEtEr AnD inDicAtors (i) ..7-15 DEcAls ................1-29 chEcKing hEAD light, hAzArD light Etc.
  • Page 238 DK6010 fuEl filtEr (s) ..............7-23 EnginE coolAnt tEMpErAturE gAugE ....4-18 fuEl gAugE ..............4-17 EnginE oil prEssurE WArning lAMp .....4-20 function DEscription AnD opErAting tips ..4-1 EnginE sEriAl nuMBEr ..........2-2 fWD/quicK-turn sWitch ..........4-10 EnginE trouBlEshooting ...........9-2 EntrAncE ...............4-44 Error inDicAtor ............4-28 gEnErAl prEcAutions ..........1-2...
  • Page 239 inDEx hoW to folD thE rops ..........5-13 juMp stArting ..............5-8 hoW to rAisE thE rops to upright position ..5-15 hoW to WArM up EnginE (for hYDrAulic shuttlE trActor) ............5-8 KEY sWitch ...............4-7 hoW to WArM up EnginE(for MAnuAl trActor) ..5-7 hYDrAulic BlocK............6-19 hYDrAulic BrAKE VAlVE(if EquippED) ......6-9 l inDicAtor (if EquippED) ...........4-22...
  • Page 240 DK6010 prEcAutions for hAnDling ........7-26 noisE lEVEls As pErcEiVED BY thE opErAtor ..3-8 prEcAutions WhEn coMing in AnD out of WorK fiElD ..............5-18 prEcAutions WhEn using poWEr stEEring ..5-20 prEcAutions WhilE DriVing on thE roAD ...5-18 oils AnD fluiDs ...............2-4 prE-opErAtion chEcK ..........5-2...
  • Page 241 inDEx rEAr WhEEl instAllAtion pAttErn ......4-59 sEAt sliDing ..............4-37 rEAr WinDoW ..............4-45 shuttlE shift lEVEr ...........4-32 rEcoMMEnDED tirE-sEt ..........3-15 sloW-BloW fusE (Ap) ..........7-43 rEMotE hYDrAulics DouBlE Acting lEVEr (if spEcificAtions ..............3-1 EquippED) ..............5-26 stAnDArD iMplEMEnt DiMEnsions ......3-12 rEMoVAl AnD instAllAtion of 3-point hitch stAnDArD trEAD DiMEnsion (rEAr WhEEl) ..4-58 iMplEMEnt (incluDing connEction of uni- stArting thE EnginE .............5-3...
  • Page 242 DK6010 WhEn loADED BucKEt AnD rEAr BAllAst ArE instAllED ..............6-15 turn signAl lAMp ............4-18 WhEn opErAting thE p.t.o .........1-15 turn signAl light sWitch ...........4-9 WhEn pArKing thE trActor ........1-14 turning ................5-17 WhEn unloADED BucKEt AnD rEAr BAllAst ArE instAllED ............6-15 WhEn using thE 3-point hitch .........1-16...

Table of Contents

Save PDF