ANSI CPE safety guidelines
2 ANSI CPE safety guidelines
This chapter provides information about the mandatory regulations that govern the
2.1 Safety instructions
This section describes the safety instructions that are provided in the CPE customer
2.1.1
The safety instruction boxes are provided in the CPE customer documentation.
The following is an example of the Danger box.
The Danger box indicates that the described activity or situation may pose a threat
Do not proceed beyond a Danger box until the indicated conditions are fully
The following is an example of the Warning box.
The Warning box indicates that the described activity or situation may, or will, cause
16
installation and operation of devices in the North American or ANSI market.
documentation and on the equipment.
Safety instruction boxes in customer
documentation
Observe the instructions to meet safety requirements.
Danger —
to personal safety. It calls attention to a situation or procedure which, if not correctly
performed or adhered to, may result in death or serious physical harm.
understood and met.
Warning 1 —
Warning 2 —
equipment damage, loss of data, or serious performance problems. It identifies a
possible equipment-damaging situation or provides essential information to avoid
the degradation of system operations or data.
3FE-48009-AAAA-TCZZA
Possibility of personal injury.
Possibility of equipment damage.
Possibility of data loss.
7368 ISAM ONT G-240W-J Product Guide
Issue: 01