Ntp Settings" Configuration Page - ABB 83342-500 Operating Instructions Manual

Operating Instructions
ABB-Welcome
Set the time zone.
Note
In case of a fixed IP address, there is the possibility that the device has obtained a new address
via DHCP after the software update.
For a new assignment of the IP address, please observe the details in chapter 5 of the IP-Gateway
manual.
6.12

"NTP settings" configuration page

Pos : 66 /#Neustr uktur#/Online-Dokumentati on (+KN X)/Bedi enung/T ü rkommuni kati on/Busc h-Welc ome/Menü NT P Ei nstellungen - 83341 @ 36\mod_1363612489392_15.doc x @ 288838 @ 2212211111111111111111111112222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222 22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222221222222222111121111111111111111111111111112232223322222222222222 @ 1
Fig. 20: "NTP settings" configuration page
The "NTP (Network Time Protocol) settings are used to define with which time signal the IP-Gateway is
synchronized.
There are two options for synchronization:
Synchronization via the Internet
1. Select the Internet time (NTP) setting.
2. Add an NTP server.
Five NTP servers will be connected automatically one by one.
pool.ntp.org(default one)
time.nist.gov
ntp.Apple.com
time.windows.com
time-a.nist.gov
3. Set the time zone for your location.
4. Save your entries.
Operating Instructions |V1.0
Error! Use the Home tab to apply
标题 1 to the text that you want to
appear here.
— 37 —