Bosch Rexroth IPC 40.2 Project Planning Manual page 66

9-12
Software
The program Calibrate might be of special interest. If required, you can
calibrate the touch mouse with the help of this program. For this, touch,
one after the other, the middle of the four crosses displayed on the
screen.
For further information on this programs refer to the online help, which
you can start directly
D:\Programs\UPDD\.
as file GENER-EN.CHM
DOK-SUPPL*-IPC*40.2***-PR02-EN-P
IPC 40.2
in folder