Bosch Rexroth IPC 40.2 Project Planning Manual page 61

IPC 40.2
DOK-SUPPL*-IPC*40.2***-PR02-EN-P
In the Command area an executable program (*.exe; *.bat) can be
entered or activated, that can still be started and carried out after the
initialization of the shutdown. This is always reasonable, if applications
which do not respond to the system messages, have to be backuped or
stopped. For this, corresponding clearing and terminating programs can
be entered and activated. If several programs have to be executed or if
the programs have transfer parameters, they have to be combined and
entered in a batchfile.
Note: The entry must not contain any request parameters and the
specified program must not start any shutdown!
If you activate the Default button, all settings are reset to their standard
values.
These are:
• COM Port:
• Shutdown Delay Time:
• Enable Startup Battery Test:
• Enable Temp Control:
• Enable Fan Control:
• Enable Voltage Control:
• Disable UPS:
• No Powerdown on Shortbreak:
• Execute Command File:
9-7
Software
COM4
30 sec
active
active
active
active
inactive
active
inactive