Operating Safety - Sealey Auto Service Series Instructions Manual

1.5.

operating safety

1.5.1. use the tool only as directed. do Not operate the tool unless the instruction
manual has been read thoroughly.
1.5.2. the display unit is not waterproof. the imager head and cable are waterproof,
but not acidproof or fireproof. Avoid submersing the imager head and cable into
corrosive, oily places and be sure to keep the imager head and cable away
from high temperature objects.
1.5.3. do Not immerse the display unit in water.
1.5.4. do Not use excessive force to insert or withdraw the imager head and cable.
this may result in damage to the tool or inspection area.
1.5.5. do Not use the imager head and cable to modify surroundings, clear
pathways or clogged areas.
1.5.6. do Not place the imager head and cable into anything or anywhere that may
contain a live electric charge or moving parts.
1.5.7. do Not use the tool for personal inspection or medical use in any way. this is
Not a medical tool.
1.5.8. do Not eat or smoke while operating the tool. use hot, soapy water to wash
hands and other body parts exposed to drain contents after using the tool to
inspect drains and other areas that may contain chemicals or bacteria.
1.5.9. When the inspection is completed, carefully withdraw the imager head and
cable from inspection area.
1.5.10. store components and accessories out of the reach of children and other
untrained persons.
1.5.11. Maintain the tool with care. Properly maintained tools are less likely to cause
injury.
1.5.12. do Not drop the tool. If the tool is accidently dropped, check for damage.
1.5.13. Always wear appropriate personal protective equipment whilst handling and
using the tool. A full range of PPe is available from your sealey dealer.
1.5.14. Protect against excessive heat. the tool should be kept away from heat
sources. do Not use the tool near moving machinery or in areas where the
temperature will exceed 113°f (45°c).
1.5.15. After use, store the tool in a safe, dry, childproof area.
Page 3
Original Language Version
© Jack sealey limited 2012
VS8220 Issue: 2(SP) - 23/09/13