Sealey Auto Service Series Instructions Manual page 17

Borescope 8.5mm
Hide thumbs Also See for Auto Service Series:
Table of Contents

Advertisement

4.5.15. Capturing a Video. While in the live screen, make sure the video icon is
present at the top left portion of the screen. Press oK button to start capturing
video (fig.22). You will notice that a red REC icon appears at the top right
portion of the screen, just below battery capacity icon. this shows that video
is capturing. the time at the top left portion, just below video icon, will begin
counting. this indicates how long the video has been captured. Press oK
button again to stop capturing a video. It may take a few seconds to save the
captured video to internal memory. the tool can capture a video for
approximately 80 seconds without a Micro sd card.
Note: before capturing a video, the figure at the top left under the video icon
indicates how long a section of video you can save in the space left (fig.23).
Page 17
fig.21
fig.22
fig.23
Original Language Version
© Jack sealey limited 2012
VS8220
Issue: 2(SP) - 23/09/13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proscope 1 digital vs8220

Table of Contents