Patient Mode (With Therapy Off) - Philips Respironics E30 User Manual

Philips Respironics E30 User Manual
3.10.2 Updating software using the SD card
You can update the device software using the SD card. The software update must be done when the therapy
is off.
1. Insert an SD card with the new software version into the device. A pop-up screen appears asking "Would
you like to upgrade software?"
2. Turn the control dial to select Yes and then press the control dial to start the upgrade. The busy icon
appears while the upgrade is in progress. Do not remove power from the device.
3. If the software update is successful, the Change Accepted icon appears on the screen. Removed the SD
card from the device to restart the device and use the new software.
4. If an SD card error is detected, the Change Rejected icon appears . Remove the SD card and reinsert. If
the alert continues to occur, contact Philips Respironics at 1-800-345-6443 for a new SD card.
Clearing patient data for multiple users
To clear patient data from the device, use the Reset Data option, available through the Device menu. See
Device settings earlier in this document for more information.

3.11 Patient mode (with therapy off)

When Provider Mode is locked, you can scroll between the following options:
My Info This menu provides summary statistics of therapy use.
My Provider This menu where some device configurations can be viewed.
My Setup This menu contains comfort settings that you can adjust as needed.
3.11.1 My Info
When you select My Info, you will be able to view the following screens. You cannot change settings in the
My Info menu. These screens are only for reference.
26 Device setup
My Info My Provider My Setup