Overheating Protection - Miele KM 7678 FR Operating And Installation Instructions

Overheating protection

All the induction coils and cooling
elements for the electronics are fitted
with an overheating protection
mechanism. Before the induction coils
and/or cooling elements get too hot, the
overheating protection mechanism cuts
in in one of the following ways:
Induction coils
- Any Booster function in operation will
be switched off.
- The set power level will be reduced.
- The heat for a zone switches off
automatically.  flashes alternately
with  in the timer display.
You can use the zone again as usual
when the fault code has gone out.
Cooling elements
- Any Booster function in operation will
be switched off.
- The set power level will be reduced.
- The heat switches off automatically.
The affected zones can only be used
again as usual once the cooling
element has cooled down to a safe
level.
The overheating protection may be
activated under the following
circumstances:
- The pans being used are empty.
- Fat or oil is being heated on a high
power level.
- Insufficient ventilation to the
underside of the hob.
- A hot zone being switched on after
an interruption to the power supply.
If, despite removing the cause, the
overheating protection mechanism
triggers again, contact your Miele
dealer.
Safety features
41