Switch Off Automatically - Miele KM 7678 FR Operating And Installation Instructions

Switch off automatically

You can set a time after which the heat
for a pan will switch off automatically.
This function can be used for all pans at
the same time.
The switch-off time is set on the
numerical display for each pan you
want to switch off automatically.
If the time programmed is longer than
the maximum operating time allowed,
the safety switch-off will switch off the
cooking zone (see "Safety features –
Safety switch-off").
If you re-position a pan and reset the
power level, the switch-off time will be
deleted. You must then reset the
switch-off time.
 Set a power level for the required
pan.
 Touch the  sensor control.
The indicator light will start to flash.
 Set the required duration.
 If you want to set a switch-off time for
other pans, follow the same steps as
described above.
If more than one switch-off time is
programmed, the shortest time
remaining will be displayed, and the
corresponding indicator light will flash.
The other indicator lights will light up
constantly.
 If you want to show the time
remaining for another pan which is
counting down in the background,
touch the  sensor control
repeatedly until the indicator light for
the pan you require flashes.
Changing the switch-off time
 Touch the  sensor control
repeatedly until the indicator light for
the pan you require flashes.
 Set the required duration.
Deleting the switch-off time
 Touch the  sensor control
repeatedly until the indicator light for
the pan you require flashes.
 Touch the 0 sensor control on the
numerical display.
Timer
35