Wipe protection
The hob sensors can be locked for
20 s in order, for example, to remove
soiling. The is not locked.
Activating
Touch the sensor.
The time will count down in the timer
display.
Deactivating
Touch the sensor until the timer
display goes out.
Demonstration/showroom
mode
These functions enable the hob to be
demonstrated in showrooms without
heating up.
Activating/deactivating
demonstration mode
When this mode is set, the hob can be
operated as normal.
Switch the hob on.
Place an induction-compatible pan
on the hob.
Touch and hold the 0 and 2 sensor
controls on the numerical display at
the same time for 6 seconds.
In the timer display, flashes
alternately with (demonstration mode
activated) or (demonstration mode
deactivated) for a few seconds.
Additional functions
Activating/deactivating showroom
mode
In showroom mode, cooking
processes are simulated in an infinite
loop. The sequence of the individual
steps is repeated after 1 minute. When
you touch a sensor control or place
pans on the hob, it switches to
demonstration mode.
Switch the hob on.
Place an induction-compatible pan
on the hob.
Touch and hold the 0 and 8 sensor
controls on the numerical display at
the same time for 6 seconds.
In the timer display, flashes
alternately with (showroom mode
activated) or (showroom mode
deactivated) for a few seconds.
37