Alarm References - Huawei UPS5000 User Manual

UPS5000 Optional BSC Card
User Manual
Alarm Alarm Name
ID-Alarm
Cause ID
0597-1 Absent optional
BSC card
0598-1 BSC frequency
beyond range
0599-1 Incorrect BSC
mode setting
0101-1 BSC signal
abnormal
Issue 02 (2019-12-10)
Alarm Possible Cause
Severity
Minor 

Minor The BSC signal
frequency is not
within the preset
bypass range.
Minor The optional BSC
card is present and the
BSC mode is set to
Standard BSC mode.
Minor The BSC signal is
abnormal.
Copyright © Huawei Technologies Co., Ltd.
6

Alarm References

Troubleshooting Measure
1. Check whether the BSC
The optional BSC
card is not
connected.
2. Check whether the optional
The setting on the
MDU is incorrect.
1. Check whether the output of
2. Check whether the cable
3. Check whether the optional
Set the BSC mode to Optional
BSC card mode.
1. Check whether the BSC
2. Check whether the rack BSC
3. Replace the inter-rack BSC
4. Check whether the inter-rack
5. Replace the inter-rack
6 Alarm References
system is correctly
configured.
BSC card is correctly
connected.
other vendor's UPS is
normal.
connection from the output
of other vendor's UPS to the
optional BSC card is normal.
BSC card is damaged.
system is correctly
configured.
synchronization cable is
loose.
synchronization cable.
parallel cable is loose.
parallel cable.
8