Related Manuals for Dini Argeo DFWLKI3GD
Summary of Contents for Dini Argeo DFWLKI3GD
- Page 1 DFWLKI3GD WEIGH INDICATOR DFWLKI3GD ATEX3GD VERSION (FOR UTILIZATION IN EXPLOSION RISK AREAS) ANNEX 1 di 9...
-
Page 2: Table Of Contents
DFWLKI3GD INDEX 1. WARNINGS..................................3 2. DESCRIPTION of the SYSTEM ............................4 3. MARKINGS ..................................5 4. INSTRUCTIONS FOR INSTALLATION IN DANGEROUS AREA ..................5 4.1 BP6ATEX3GD EXTERNAL BATTERY (OPTIONAL) ..................... 7 4.1.1 BATTERY REMOVING/CHARGING ........................8 DECLARATION OF CE CONFORMITY ..........................9... -
Page 3: Warnings
It is forbidden to connect the instrument to modules not provided for by the CE declaration; this action compromises the safety of the instrument (with a subsequent loss of the Ex approval). Contact Dini Argeo srl for further information. -
Page 4: Description Of The System
- This manual has been made as carefully and exactly as possible; in any case, your suggestions are always welcome. 2. DESCRIPTION of the SYSTEM The "DFWLKI3GD”, “ATEX3GD" version, electronic weighing terminal is device for hazardous areas having presence of gas, designed and made according to the ATEX 94/9/CE directive, group II category 3GD according to the EN60079-0, EN60079-15, EN61241-0 and EN61241-1 norms with the “limited breathing”... -
Page 5: Markings
DFWLKI3GD 3. MARKINGS The equipment is marked CE according to the ATEX 94/9/CE directive (attachment X): Manufacturer logo: Dini Argeo srl; Mod.: XXXXXXX Commercial code of the instrument; S/N: xxxxx 2011 Serial number and production year; CE Markings; II 3G Ex nR IIC T6 X Specific marking against the explosions in the presence of gas: Group II (surface);... - Page 6 DFWLKI3GD Cable gland min-max cable Wrench measurement in diameters in mm In order to connect the 220 Vac power supply: unscrew the indicator’s locking screws, and the one of the fixing bracket belonging to the internal power adapter (1); unscrew the locking cap of the PG9 cable gland (2);...
-
Page 7: Bp6Atex3Gd External Battery (Optional)
DFWLKI3GD 4.1 BP6ATEX3GD EXTERNAL BATTERY (OPTIONAL) The indicator may be powered trough an external battery (optional), whose external dimensions are shown in figure: 7 di 9... -
Page 8: Battery Removing/Charging
DFWLKI3GD 4.1.1 BATTERY REMOVING/CHARGING Unscrew the two screws (A) marked in figure: Remove the battery pack. Unplug the connector from the battery pack. Connect the charger to the battery pack by the connector. WARNINGS THE BATTERY MUST BE CONNECTED, DISCONNECTED, AND RECHARGED ONLY IN A SAFE ZONE ... -
Page 9: Declaration Of Ce Conformity
DINI ARGEO Srl, Via della Fisica, 20 41042 Spezzano di Fiorano - MODENA Declare under our responsability that the following products - The “DFWLKI3GD” electronic weighing terminal described in this declaration conform to the following directives: EMC 2004/108/CE Directive 2006/95/EU Directive...
Need help?
Do you have a question about the DFWLKI3GD and is the answer not in the manual?
Questions and answers