Throttle Trigger; Interlock - Stihl FS 240 Service Manual

Installation
1
Shown without drive tube assembly
for a better view.
: Push torsion spring (1) onto the
post (2) so that the end that is
angled downward rests against
the ridge (arrow) on the left
: Use a suitable tool to press the
upper end (arrow) of the torsion
spring toward the handlebar and
hold it there
FS 240 C, FS 260 C, FS 360 C, FS 410 C, FS 460 C-M
2
2
: Slide throttle interlock (1) onto
the post (2)
– Release upper end of the torsion
spring
: Torsion spring (1) must lie in the
notch (arrow)
2
: Thread throttle cable (1) into

throttle trigger (2)

– Turn throttle trigger by 90°
counterclockwise
1
: Slide throttle trigger (1) onto the
1
: Orient throttle trigger (1) so that
1
1
1
: Push torsion spring (1) under the
1
2
post (2)
2
the lug (2) engages the trigger
interlock (arrow)
2
throttle cable (2)
83