Using Your Refrigerator; Temperature Control And Adjustment; Thermostat Setting Button - Blomberg KGM4530 User Manual

5

Using your refrigerator

Temperature Control And
Adjustment
The operating temperature is regu
lated by the temperature control.
Warm
1 2
(Or) Min.
1=Lowest cooling setting
(Warmest setting).
5=Highest cooling setting (Coldest
setting).
The average temperature inside the
fridge should be around +5°C.
Please choose the setting according
to the desired temperature.
Please note that there will be different
temperatures in the cooling area.
The coldest region is immediately
above the vegetable compartment.
The interior temperature also
depends on ambient temperature,
the frequency with which the door is
opened and the amount of foods kept
inside.
Cold
3 4 5
Max.
Frequently opening the door causes
the interior temperature to rise.
For this reason, it is recommended
to close the door again as soon as
possible after use.

Thermostat setting button

The interior temperature of your
refrigerator changes for the following
reasons;
• Seasonal temperatures,
• Frequent opening of the
door and leaving the door open for
long periods,
• Food put into the refrigerator
without cooling down to the room
temperature,
• The location of the
refrigerator in the room (e.g. exposing
to sunlight).
• You may adjust the varying
interior temperature due to such
reasons by using the thermostat.
Numbers around the thermostat
button indicates the cooling degrees.
• If the ambient temperature is
higher than 25°C, turn the thermostat
button to maximum position.
• If the ambient temperature is
lower than 25°C, turn the thermostat
button to minimum position.
14
EN