Mitsubishi Electric PLK-G2008H-BTRM Hardware Support Document

Support documentation
Industrial Sewing Machine Specifications
Electronic Pattern Sewing Machine
Model：PLK-G2008H-BTRM
1. Features
This Electronic Pattern Sewing Machine "PLK-G2008H-BTRM", there is no upper thread trimmer,
unlike PLK-G2008H, the thermal trimming system comes with only the lower side.
So unlike the operation "PLK-G2008H".
This support documentation explains this difference. Carefully read it, please use this sewing
machine correctly.
2. Initial setting of the control box
If you want to initialize the table setting of The Electronic Pattern Sewing Machine
"PLK-G2008H-BTRM", part of the contents of the TECHNICAL MANUAL "SEWING MACHINE
HEAD BASIC" are different.
Because it shows the difference between how to set the following, please correct initial settings.
(4) Section is a screen for selecting the step file, in
"4-2-2 Reading of the setting table" in the TECHNICAL
MANUAL "SEWING MACHINE HEAD BASIC".
Please choose [2008BT * * ] by using up and down
arrow button.
2 0 0 8 B T * *
(The * * mark displays file version. )
By press , select the screen to select the setting
file.
Please choose [2008BT * * ] by using up and down
arrow button.
[NOTICE] When using the supplied USB memory, you do not have to do the work that is described
in the "4-2-1 Setting table save to USB memory" in the TECHNICAL MANUAL "SEWING
MACHINE HEAD BASIC".
[NOTICE] The setting file and step file by CD-ROM（PLK-G Document CD）which included in the
PLK-G-PAL must not be used. To do so may cause malfunction.
A150D100H01