Table of Contents
Advertisement
r Operation screen of the ClipConvert software
1 "High"/"Standard"
Select the image quality of the clip file to be generated.
High: Approximately 200 Mbps, Standard: Approximately 100 Mbps (other than following format)
High: Approximately 400 Mbps, Standard: Approximately 200 Mbps (1080/59.94p, 1080/50p)
High: Approximately 1600 Mbps, Standard: Approximately 800 Mbps (2160/59.94p, 2160/50p)
2 "Frame"
Select the frame rate of the clip file to be generated.
The clip file with different frame rate from the Live Production Suite system format cannot be loaded by Live Production Suite.
In the interlace mode and PsF mode, one file is expanded into two fields; and in the progressive mode, one file is equivalent to one frame.
3 "alpha"
Select this check box when converting images with key signals.
4 "Convert"
Select a TARGA file.
f The TARGA files will be grouped when the TARGA files are in sequential number, and the name in front of the number will be displayed as the file
name. To recognize as TARGA files in sequential number, add four digit numbers starting with 0001 in sequence after the file name excluding the
file extension in advance.
f To generate a clip file with audio data, save the audio file (extension .wav) in the same folder as the folder where the TARGA files are saved. At this
time, set the name of the audio file (part excluding the extension .wav) same as the name of the TARGA files (excluding the sequential number and
extension .tga). The audio file with different name from the TARGA files is not loaded, and audio data will not be embedded in the clip file.
f Example) A clip file with audio data can be created by preparing following files and saving in the same folder.
- picture0001.tga - picture0011.tga
- picture.wav
5 "Save"
Specifies the destination and file name of the clip file to be generated.
The file name omitted in the display at the time the clip file is loaded to Live Production Suite when a file name exceeding 8 characters (excluding file
extension). It is recommended to specify the file name with 8 characters or less.
6 "Convert"
Executes the conversion. The clip file is generated when executed.
7 "Cancel"
Cancels the program.
@
NOTE
t TARGA files compressed in the RLE format cannot be used.
t Only the TARGA file in full color format can be used.
t To use in the 1080p format, prepare even number of TARGA files. The clip file with even number of frames by copying the last frame is generated
when odd number of TARGA files are loaded.
r Header formats of supported TARGA files
f Numbers with H are in hexadecimal notation.
Offset
Length
(bytes)
(bytes)
0
1
1
1
2
1
3
2
5
2
7
1
8
2
10
2
12
2
14
2
16
1
17
1
Chapter 5 Basic Operations — Video memory
Header
ID field length
Color map type
Image type
Color map origin
Color map length
Color map entry size
X coordinate of image
Y coordinate of image
Width of image
Height of image
Color depth
Image descriptor
1
2
3
4
5
6
7
Description of setting
―
No color map
Full color
No restrictions
No restrictions
No restrictions
No restrictions
No restrictions
Varies depending on the image size.
Varies depending on the image size.
24 bits
32 bits
No restrictions
– 97 –
Setting
0H
0H
2H
―
―
―
―
―
―
―
18H
20H
―
Advertisement
Table of Contents
