Event Memory - Panasonic Live Production Suite Series Operating Manual

[XPT]
[A/B XPT]
[Key XPT]
[AUX Sel1]: [All], [AUX1] - [AUX16]
[AUX Sel2]: [AUX1] - [AUX16]
[AUX Sel3]: [AUX1] - [AUX16]
[AUX Sel4]: [AUX1] - [AUX16]
[AUX Sel5]: [AUX1] - [AUX16]
1
Select the <MEM> button → [SHOT MEMORY] → [Detail Select] tab.
2
Select an item in [BKGD]/[Key1]/[Key2] in the [Detail ME] column.
[ON]
[OFF]
3
Select an item in [A/B XPT]/[Key XPT] in the [Detail XPT] column.
[ON]
[OFF]
4
Select an item in [AUX Sel1] to [AUX Sel5] in the [Detail AUX] column.
f Select an item from [AUX1] to [AUX16].
To select all AUX buses, select [All] in [AUX Sel1].
Setting the target of registering and playing back when operating on the multi-selection panel
Press the <SHOT MEM> button on the multi-selection panel, then set the target of registering and playing back when [ME ALL] is selected in the
[TARGET SELECT] menu.
1
Select the <MEM> button → [SHOT MEMORY] → [Multi Select] tab.
2
Select an item in [ME1]/[ME2]/[DSK]/[AUX] in the [Select ME All] column.
[ON]
[OFF]

Event memory

Register multiple image effects that can be registered in the shot memory as events. Smooth transitions can be achieved by playing back images
continuously while interpolating between events. A group of these events are referred to as an event memory.
Maximum 64 events can be registered in one event memory.
Event 1
@ NOTE
t Use the Menu Panel to register and edit events in the work memory, and save the created event memory in a register memory.
Chapter 5 Basic Operations — Memory
[BKGD]
BKGD
[BKGD]
BKGD
[AUX]
Made the target for recalling.
Not made the target for recalling.
Made the target for recalling.
Not made the target for recalling.
Made the target of registering and playing back.
Not made the target for registering and playing back.
Interpolation Interpolation event 2
Event memory
[ME1]
[Key1] [Key2]
Key1 Key2
[ME2]
[Key1] [Key2]
Key1 Key2
[DSK]
Key1 Key2
[CBGD]
CBGD1
CBGD2
Interpolation
– 81 –
[Key3] [Key4]
PinP1 PinP2
[Key3] [Key4]
PinP1 PinP2
Event 3