Adjusting The Gain Of Color Matrix - Panasonic Live Production Suite Series Operating Manual

[Red]
1
Select the <CC> button → [SDI IN 1] to [SDI IN 20] → the tab to be set.
f Select the tab corresponding to the terminal for which you want to set the color corrector.
2
Set [Red], [Green], and [Blue] in the [Tone1 Black]/[Tone2 Gray L]/[Tone3 Gray H]/[Tone4 White] column.
[Tone1 Black]
[Tone2 Gray L]
[Tone3 Gray H]
[Tone4 White]
3
Select an item in [RGB Link] in the [Tone1 Black] column.
[OFF]
[ON]
@ NOTE
t The unit simply connects the set black level, gray Low level, gray High level, and white level to create a tone curve. Depending on the setting values,
the tone curve might not be as desired.

Adjusting the gain of color matrix

1
Select the <CC> button → [SDI IN 1] to [SDI IN 20] → the tab to be set.
f Select the tab corresponding to the terminal for which you want to set the color corrector.
2
Set [R-G], [R-B], [G-R], [G-B], [B-R], and [B-G] in the [Matrix R/G]/[Matrix B] column.
[R-G]
[R-B]
[G-R]
[G-B]
[B-R]
[B-G]
Chapter 5 Basic Operations — Color corrector
[Green]
Adjusts the black level.
Adjusts the gray Low level.
Adjusts the gray High level.
Adjusts the white level.
Enables setting of the [Tone1 Black]/[Tone2 Gray L]/[Tone3 Gray H]/[Tone4 White] column independently from RGB.
Uses the value of [Red] as the values of [Green] and [Blue] for the [Tone1 Black]/[Tone2 Gray L]/[Tone3 Gray H]/[Tone4
White] column.
Sets the gain value in the R-G axis direction.
Sets the gain value in the R-B axis direction.
Sets the gain value in the G-R axis direction.
Sets the gain value in the G-B axis direction.
Sets the gain value in the B-R axis direction.
Sets the gain value in the B-G axis direction.
[Blue]
– 75 –
1: [Tone1 Black]
2: [Tone2 Gray L]
3: [Tone3 Gray H]
4: [Tone4 White]