Updating Dock Firmware - Avid Technology AvidDock Manual

Updating Dock Firmware

After installing EuControl, make sure your Dock and other Avid media controllers are running the latest firmware. The firmware
is provided within EuControl, so an Internet connection is not required.
To update firmware:
Click (Mac) or double-click (Windows) the EuControl icon and select EuControl Settings .
1
If necessary, click Surfaces to display the Surfaces tab.
2
If the Dock is not listed in the My Surfaces list at right, click to select it in All Surfaces and then click Add (or, drag it from
3
All Surfaces and drop it into the My Surfaces list).
Click Avid Dock in the My Surfaces list so it is highlighted.
4
Surfaces tab
Click Update Firmware . If the Update Firmware dialog indicates that the surface is up to date, no further action is necessary.
5
If the firmware needs to be updated, follow the instructions in the Update Firmware dialog box to proceed, and make sure to ob-
6
serve the following guidelines when updating firmware:
• Ensure that the Dock is connected to a trustworthy power source.
• Do not power off the Dock during the update or attempt to interrupt the update.
The status of the firmware update is shown in the EuControl dialog.
Click Done when the firmware update is complete, then proceed to
7
Installation and Setup
Enabling EUCON in Pro Tools .
9