Sealey TC967.V2 Manual

thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instruction protection
manual
1. SaFety
WarNINg! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
‰
equipment.
Familiarise yourself with the applications, limitations and any possible or potential hazards of the tyre changer.
9
maintain the tyre changer in good condition (use an authorised service agent).
9
Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
9
WarNINg! Check regularly for damaged parts. Any part that is damaged must be repaired or replaced before the equipment is next
‰
used. locate the tyre changer in a suitable work area, keep area clean and tidy and free from unrelated materials. ensure that there is
adequate lighting.
WarNINg! the tyre changer must be bolted to a work surface. For best results mount the Mini tyre changer at waist height.
‰
Keep the tyre changer clean for best and safest performance.
9
Wear approved safety eye protection.
9
Keep hands well clear of the bead breaker.
9
maintain correct balance and footing. ensure the floor is not slippery and wear non-slip safety shoes.
9
Remove ill fitting clothing. Remove ties, watches, rings other loose jewellery and contain and/or tie back long hair.
9
Keep children and unauthorised persons away from the work area.
9
DO NOt use the tyre changer for any purpose other than that for which it is designed.
8
DO NOt operate the tyre changer if any parts are damaged or missing as this may cause failure and/or personal injury.
8
DO NOt allow untrained persons to operate the tyre changer.
8
DO NOt stand on the tyre changer.
8
DO NOt operate the tyre changer when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
2. INtrODuctION
Suitable for changing tyres with small rim diameters commonly found on agricultural, leisure and industrial vehicles such as ATVs, golf buggies,
mowers, garden tractors and handling equipment. mount directly onto work surface. Supplied with tyre bar and alignment cone.
3. SpecIFIcatION
model no ................................................................ TC967.V2
nett weight .................................................................... 6.8kg
Wheel depth maximum............................................. <150mm
Working diameter minimum/maximum ..... Ø100mm/Ø300mm
© Jack Sealey limited
MINI tyre chaNger
model no:
Wear Wear
protective protective
gloves footwear
Original Language Version
tc967.V2
TC967.V2 | Issue:1 23/05/18