Mitsubishi Electric MP-G10-AH Technical Manual page 9

Cable Signal name
Work holder input 2
(I8)
0V
＋24V
Work holder output 1
(O4)
＋24V
Label holder output 2
(O5)
＋24V
Flip-flop shaft rotation
output 3
(O6)
4.4 Removing the standard parts
When this label holder unit is mounted, the presser foot and wiper drive mechanism
mounted on the sewing machine head cannot be used and must be removed.
To remove these parts, refer to the part catalog P-246 for the PLK-G1010 sewing machine
unit, and remove the parts including Fig. No. M111 presser foot, Fig. No. M112 needle guard,
Fig. No. M113 screw and Fig. No. N124 wiper.
Connection
Sewing machine head Connector
CON L (12P) - ①
Sewing machine head Connector
CON L (12P) - ②
Sewing machine head connector PCB
CON13 (FU)－②
Sewing machine head connector PCB
CON13 (FU)－①
On machine head PCB terminal block
CON15 (OP1) - ③
On machine head PCB terminal block
CON15 (OP1) - ①
On machine head PCB terminal block
CON14 (OP2) - ③
On machine head PCB terminal block
CON14 (OP2) - ①
- 7 -
White
Black
Solenoid
White valve
Blac k
Solenoid
White
valve
Black
Solenoid
White valve
Black