Home Position - Mitsubishi Electric MP-G10-AH Technical Manual

5. Home position

5.1 Adjusting the home position
If the machine's home posit ion is at the same posit ion even if the label size
changes, it will be easier to make a clamp and change it. Thus, change the
home position in ant icipat ion of the maximum size.
The relat ion of the work holder, stitching area and home posit ion is as
shown below.
(1) The optimum range f or moving the home posit ion is shown as the shaded
section. Note that when consider ing the label size, the home position
should be moved at a position wit hin the shaded area at least 4mm or more
away f rom the label holder plate when the No.142 label holder plate
overlaps the shaded area or when it is near this area.
(2) Ref er to the PLK-G1010 Sewing machine head instruction manual (7-21
Adjustment of the X-Y mechanical home position), and adjust the home
posit ion.
O r i g i n a l m e c h a n i c a l
h o m e p o s i t i o n
- 9 -
Mi n i m u m s t i t c h i n g d i m e n s i o n s
Ma xi m u m s t i t c h i n g d i m e n s i o n s