Mitsubishi Electric MP-G10-AH Technical Manual page 15

7. Stitching test
(1) Select the stitching pattern.
(Ref er to the PLK-G1010 Control sect ion instruct ion manual.)
(2) Set the material to be stitched, and then press the [Black] side of the 2-pedal
f oot switch to lower t he work holder.
(3) Set the label under the label holder plate, and then press the 1-pedal f oot
switch to lower the label holder.
(If the position of the label deviates due to the thrust when the label holder
losers, adjust the lowering speed with the speed controller at the Fig. No. 109
air cylinder in the work holder mechanism .)
(4) Press the [Gray] side of the 2-pedal f oot switch to rotat e t he sewing machine
and start stitching.
(Stitching will not st art unless the work holder and label holder are lowered.)
(5) The f lip-f lop shaf t will rotate at the posit ion where the reverse signal is
issued in the stitching pattern.
(6) W hen stitching is completed, the sewing machine will automatically return to
home position, and the holders will rise.
- 13 -