Adding Fabric Softener Or Liquid Starch Separately; Adding Starch Separately - Miele PWM 507 Hygiene Operating And Installation Instructions

Adding fabric softener or liquid
starch separately
 Select the Separate rinse programme.
 Change the spin speed if necessary.
 Add the fabric softener or the liquid
starch to the  compartment. Do not
exceed the maximum level mark.
 Touch the Start/Stop sensor.
This will be automatically dispensed in
the final rinse. At the end of the wash
programme a small amount of water
remains in the  compartment.
5. Adding detergent

Adding starch separately

 Prepare the starch solution in
accordance with the manufacturer's
instructions on the packaging.
 Select the Starch programme.
 Add the prepared starch to the
 compartment.
 Touch the Start/Stop sensor.
Useful tip: If starching separately or
automatically, thoroughly clean the
detergent dispenser compartment,
especially the siphon, regularly.
Dye removers and dyes

Damage due to colour run/dye
removers.
Colour run and dye removers can
cause corrosion in the washing
machine.
Do not use colour run or dye
removers in this washing machine.
Only use dyes suitable for use in a
washing machine. The manufacturer's
instructions on the packaging must be
observed.
External dispensing
The washing machine is pre-equipped
for connection to an external detergent
dispensing system. A separate
conversion kit for external dispensing
systems is required. This must be fitted
by a Miele authorised service
technician.
29