General Information On The Sinumerik 840Di Sl - Siemens SINUMERIK 840DiE sl Manual

General Information on the SINUMERIK 840Di sl

1.1 Overview of SINUMERIK 840Di sl
USB
(standard I/O)
PROFIBUS- -DP (2) (12 MBaud)
Fig. 1-1 System overview of SINUMERIK 840Di sl
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) - - 01/2007 Edition
With the SINUMERIK 840Di sl, Siemens can provide a complete PC--integrated
control that controls the drive units and I/Os through the standard fieldbus
PROFIBUS DP with Motion Control functionality and therefore permits a distrib-
uted design of the overall system. It therefore constitutes the basis for PC--
based automation solutions and is generally designed especially for applica-
tions with the following requirements:
S Distributed automation solutions in the fields of PLC I/Os and drives.
S Fully PC--integrated control, owing to increased integratability in the target or
current automation environment.
Operator panel
front
(e.g. OP012
PCU 50.3
MCI board extension
(option)
MCI board
)
Networking
programming device)
Networking
(e.g., company network)
PROFIBUS- -DP (1) (12 MBaud)
1
(TCP/IP)
(e.g. MCP, TCU,
(TCP/IP)
Measuring
pulses
Handwheels
Fast I/Os
1-21