Fault And System Messages; Diagnostics; Diagnostics Via Leds - Siemens SINAMICS SL150 6SL39616RC100AA02 Operating Instructions & Installation Instructions

Operation

8.2 Fault and system messages

Note
To complement these operating instructions, the List Manual contains an overview of all
parameters as well as a selection of function diagrams to describe the operating principle.
8.2 Fault and system messages
Hardware trace
The drive saves data to the CompactFlash card each time there is a fault trip. Customer
Supports requires this data in the case of a fault.
Save your data as follows:
1. Switch off the drive.
2. Switch off the power supply for the control cabinet. Remove the CompactFlash card from
3. Save all data of directory "Install\Sinamics\Trace".
4. Send these data to Customer Support.
8.2.1

Diagnostics

8.2.1.1

Diagnostics via LEDs

LED for Sirius safety relay
Device
74
the Control Unit.
LED
Out
Green Green
Green Off
Green Off
Off Off
Line Sensor
On Not confirmed
Was confirmed
Not confirmed
Cross-circuit or no power supply
Operation
Start pushbutton
Was confirmed
-
-
Fault
SINAMICS SL150 6SL39616RC100AA02
Operating Instructions Rev.201910281458 EXAMPLE
Safety-related output
Closed
Open
Open
Open