English HEAVY-DUTY ROTARY HAMMERDRILL D25733, D25773 Congratulations! This may significantly reduce the exposure level over the total working period. You have chosen a D WALT tool. Years of experience, thorough Identify additional safety measures to protect the operator product development and innovation make D...
English b ) Use personal protective equipment. Always wear Denotes risk of fire. eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used General Power Tool Safety Warnings for appropriate conditions will reduce personal injuries. WARNING: Read all safety warnings, instructions, c ) Prevent unintentional starting.
English performed. Use of the power tool for operations different wrapped around a spinning bit may cause personal injury and from those intended could result in a hazardous situation. loss of control. WARNING: We recommend the use of a residual current 5) Service device with a residual current rating of 30mA or less.
English Package Contents • This product is not intended for use by persons (including children) suffering from diminished physical, sensory or The package contains: mental abilities; lack of experience, knowledge or skills 1 Rotary hammerdrill unless they are supervised by a person responsible for their 1 Side handle safety.
Page 9
English • When chiselling or drilling in soft, brittle materials or when trigger switch is in the OFF position. An accidental start-up minimum break-out is required, set the dial to a low setting; can cause injury. • When breaking or drilling in harder materials, set the dial to Side Handle (Fig.
Page 10
English Switching On and Off (Fig. A) trigger switch is in the OFF position. An accidental start-up can cause injury. To turn the tool on, depress the trigger switch 1 To stop the tool, release the trigger switch. Proper Hand Position (Fig. D) Drilling with a Solid Bit (Fig.
English source before making any adjustments or removing/ installing attachments or accessories. Be sure the trigger switch is in the OFF position. An accidental start-up can cause injury. Lubrication Your power tool requires no additional lubrication. Cleaning WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the air vents.
Page 12
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)