Table of Contents
Advertisement
5. While fi xing the arm on the jar, ensure
that the groove in arm, matches with the
circular ring on lid (Fig. 14)
6. Turn the speed selector to the required
position. Select the speed to suit the
recipe (Fig. 15)
3
7. After operation, turn selector knob to
'Off ' position (Fig. 16)
3
8. For pulse, turn speed selector knob
anticlockwise from '0' position gently
9. Pull the arm in upward direction. Press
the button to move the arm upwards
(Fig. 17)
10. Finally press the button to unlock the jar
(Fig. 18)
6.2 Mixer grinder with timer (HL 1651)
1. Connect the main plug to the wall socket
(Fig. 19)
2. Switch on the main supply
3. LED display will show -- : -- indicating the
power supply is on (Fig. 20)
4. Fix the jar on the motor unit, with the help
of the arrow on the jar collar and motor
unit. The LED display will change to 00: --
(Fig. 21)
5. Fill the jar with the ingredients and put the
lid (Fig. 22)
6. Fix the arm on the jar. The LED display will
change to 00:00. This indicates that the
appliance is ready to use (Fig. 23)
7. Default mode of the operation is 'Auto. ' To
go on to the Manual mode, press the mode
button. The LED display will now change
(Fig. 24)
8. Set the time using Up and Down arrows.
Maximum time that can be set is 30
minutes (Fig. 25)
Note: The appliance will auto shutoff after 5
minutes (Auto mode) and 3.5 minutes (Manual
mode) of continuous operations, to avoid any
unforeseen situation. In case, the appliance
doesn't start within 5 minutes after setting the
time OR stops in between, and is not restarted
within 5 minutes, the display will reset to 00:00
9. Turn the speed selector knob to the
required position. Select the speed to suit
the recipe (Fig. 26)
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the HL1659/28 and is the answer not in the manual?
Questions and answers
Mixer is not starting even power is ON
The Philips HL1659/28 food processor may not be starting even though the power is on due to several possible reasons:
1. Improper Assembly – Ensure that all parts, including the gear box and jars, are correctly assembled.
2. Safety Lock Not Engaged – The appliance may have a safety feature that prevents operation if the arm is not properly locked.
3. Speed Selector Not Set – Ensure the speed selector knob is not in the 'Off' position.
4. Overload Protection Activated – If the appliance has overheated or overloaded, allow it to cool down before restarting.
5. Damaged Components – Check if the mains cord, plug, or other components are damaged, as this may prevent operation.
Verify these points to troubleshoot the issue.
This answer is automatically generated
Change mode problem auto and manual
To change the mode between Auto and Manual on the Philips HL1659/28:
1. By default, the appliance operates in Auto mode.
2. To switch to Manual mode, press the mode button.
3. The LED display will change, indicating the switch to Manual mode.
This answer is automatically generated
@Mr. Anderson no change mode