Fujitsu MB904 Series Application Note page 16

Table of Contents

Alternately you can use the right mouse button on the Debug item in the

browser window.

MCU-AN-390077-E-V11

Chapter 4 Set-up Debug Configuration

After the conversion the project browser window shows the open

project with the corresponding project files

To set-up the debugger configuration use the <Project>, <Setup

Project> menu and select the Debug tab in the upcoming dialog.

Select for category "Setup". Now a Debug set-up name can be

entered e.g. MB2147-05 USB. With the <Add> button the debug set-

up wizard will be started to do some special configuration settings.

- 16 -

Table of Contents