AISU
User Manual
Procedure
Step 1 In the parameter input area, enter RMV RAE in Command (F5), and then click Assist or
press Enter.
Step 2 In the parameter input area, specify related parameters.
The parameter values in the following figure are for reference only.
Step 3 Press F9 or click Exec.
If Operation succeeded is displayed in the command export area, the AISU is removed
successfully. If the AISU fails to be removed, identify causes and removed the AISU again.
----End
5.2 AISU Used with Base Stations of Other Suppliers
Perform IOT tests before using the AISU with base stations of other suppliers and determine
the AISU configuration procedure and precautions accordingly.
Issue 02 (2017-06-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuration Guide
32