Hercules RMX Updating Instructions
  1. Manuals
  2. Brands
  3. Hercules Manuals
  4. DJ Equipment
  5. RMX
  6. Updating instructions

Hercules RMX Updating Instructions

Hide thumbs
1
2
3
4
5
Table of Contents

Advertisement

Quick Links

Download this manual
Hercules Technical Support
DJ Console RMX – Windows Audio Firmware Update Procedure
1) Make sure that USB errors are reported. In order to be sure of this, open the
Device Manager (click Start/Run and enter the following command: devmgmt.msc
press Enter), then open the USB section, and for each host controller:
-
Double click on the host controller icon
-
Open the "Advanced" tab
-
Make sure that the "Don't tell me about USB errors" checkbox is unchecked
2) Download the latest package from the web:
3) Install the package. When asked to connect your DJ Console Rmx, just click on
Next
(do NOT plug in the
installation process
At this point, a message saying that the Drivers are older than expected.. will
appear. This is perfectly normal since no console was connected during the
installation process. Click OK and proceed to Step 4
5) Open the Device Manager if not already open
6) Press and hold the MIC On/Off button on the console
ts.hercules.com
device) until it reaches the end and completes the
4) Make sure the Control Panel (=
CPL) is closed.
- Open Windows Task Manager
- In the Process tab, select
HDJSeriesCPL.exe
- Click the End Process button
1
http://ts.hercules.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RMX and is the answer not in the manual?

Questions and answers

Related Manuals for Hercules RMX

Summary of Contents for Hercules RMX

  • Page 1 Make sure that the "Don't tell me about USB errors" checkbox is unchecked 2) Download the latest package from the web: ts.hercules.com 3) Install the package. When asked to connect your DJ Console Rmx, just click on Next (do NOT plug in the...
  • Page 2 Hercules Technical Support http://ts.hercules.com Plug in the device, while still holding the MIC On/Off button Hold until the Device Manager sees the device arrival OR there is a "Found New Hardware" dialog. If there is a "Found New Hardware" dialog, then proceed with the installation of the device.
  • Page 3 Hercules Technical Support http://ts.hercules.com 7) Check the status of the bulk device (Hercules DJ Console RMX Bulk) in the Device Manager. Whether or not the bulk device (Hercules DJ Console RMX Bulk) is enumerated correctly, right-click on it and select Uninstall.
  • Page 4 Hercules Technical Support http://ts.hercules.com 9) Click the Open Audio button, then browse for the RMX TUSB (RMX_TSUB.dja) firmware and click Open Then click Update! in the DJ Console – Firmware Updater in order to continue THE CONSOLE MUST NOT BE UNPLUGGED until the manual updater confirms completion and advises to do so.
  • Page 5 11) Plug in the device in normal mode (without pressing any buttons on the console) In the Device Manager, uninstall the bulk device (Hercules DJ Console RMX Bulk), (see Step 7) and reinstall all DJ devices for which there is a "Found New Hardware"...

Table of Contents