Advertisement
Quick Links
Power Harness Kit
Groundsmaster
Model No. 138-2998
Installation
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Lower the cutting units.
4.
Shut off the engine and remove the key.
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
3280-D 4-Wheel Drive Traction Unit
Accessing the Machine
No Parts Required
Opening the Hood
Register at www.Toro.com.
Installation Instructions
2
Figure 1
Original Instructions (EN)
All Rights Reserved *3423-154* A
Printed in the USA
Form No. 3423-154 Rev A
g198446
Advertisement
Related Manuals for Toro 138-2998
Summary of Contents for Toro 138-2998
- Page 1 Form No. 3423-154 Rev A Power Harness Kit Groundsmaster ® 3280-D 4-Wheel Drive Traction Unit Model No. 138-2998 Installation Instructions Installation Accessing the Machine Preparing the Machine No Parts Required Opening the Hood No Parts Required Procedure Park the machine on a level surface.
- Page 2 Removing the Battery Cables No Parts Required Procedure WARNING Battery terminals or metal tools could short against metal components, causing sparks. g253131 • When removing or installing the battery, Figure 2 do not allow the battery terminals to touch 1. Negative battery cable 2.
- Page 3 Connecting the Washer Bottle Connect the plug into the washer bottle (Figure Routing the Wire Harness No Parts Required Installing the Wire Harness Important: Whenever working with the electrical system, always disconnect the battery cables, black (-) cable first, to prevent possible wiring damage from short-outs.
- Page 4 g032519 Figure 5 1. Positive-post clamp 4. Ring connector 2. Negative-post clamp 5. Bolt 3. Nut Remove the nuts from the post bolts (Figure Install the positive-terminal connector (red wire) over the positive-post bolt and loosely install the (Figure Install the negative-terminal connector (black wire) over the negative-post bolt and loosely install the nut (Figure...